Digital Yacht
- All products listed below are in stock and ready to ship.
- Orders are shipped same day when placed before 4PM Est. and are shipped from our east coast warehouse
- Free Shipping on Orders over $200 USD
- For AIS purchase please fill out the AIS form and email filled out form to info@marineelectricsystems.net with order number
Digital Yacht ANT200 Smart AIS Antenna
$341.99 $349.95
ANT200 Smart AIS Antenna
Perfect "all in one" AIS Smart Antenna solution for small boats, particularly RIBs, Sports boats and small yachts where dry space to mount black box AIS units is limited. Simply connect 12v or 24v power and the ANT200 will start transmitting data on all AIS targets within a 10 mile* radius of your boat. Ideal for use with existing AIS compatible chart plotters such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units.
Connect the NMEA0183 (4800 baud) output of your GPS to the ANT200 and it will automatically multiplex (merge) the slower GPS data with the high speed AIS data and transmit everything on one high speed NMEA output (38,400 baud) - perfect for connection to a chart plotter with only one NMEA input.
- Multiplexed NMEA input for single NMEA GPS+AIS data output at 38,400 baud
- Simple to install "all in one" smart antenna solution
- Integral 1" x 14 TPI thread for fixing to standard VHF mounts
- 15m Power/Data cable
- High performance dual channel AIS receiver for use with existing plotter and radar systems
- High Speed NMEA output (38,400 baud)
NOTE - In much the same way as hand held VHFs do not give you the range of fixed mount VHFs (no antenna ground plane), the ANT200 does not have the same range as the AIS200/400 black box AIS units. If maximum AIS range is your highest priority then one of the other Digital Yacht receivers should be used, but for small boats with the aerial mounted at deck level, 10 miles is a good range for AIS and the ANT200 is recommended.
Specifications:
- Box Dimensions: 4"H x 8"W x 10"L WT: 1.7 lbs
- UPC: 738435472597
Quick Guide (pdf)
Digital Yacht WL510 High Power On Board Wi-Fi Access System
$750.99 $769.95
WL510 High Power Wi-Fi Access System
Part #: ZDIGWL510
Two part solution with Hi gain (0.9M) 2.4GHz Wi-Fi antenna, mounting base, 10m low loss LM400 cable and black box amplifier and modem. Simple USB connection. 1W erp. Offers 4-6 mile range capability. With external 12/24V DC power adaptor.
The interface allows you to choose which hotspot you want to access, enter WEP/WAP passwords and view signal strength and diagnostics.
Power output from the device can also be adjusted. The interface is password protected to prevent unauthorized access and a tabbed menu for easy operation. Easy web interface to connect via RJ45 patch cable to your PC and login through a browser.
Features:
- Access the internet through Wi-Fi hotspots with a range of up to 4-6nm
- Controlled via a simple web interface - no complicated drivers to install
- Connects via ethernet to onboard PC or router
- Supplies complete with high gain (15dBi) external antenna and 10m coax cable assembly
- 12VDC operation
Specifications:
- Box Dimensions: 4"H x 12"W x 38"L WT: 8 lbs
- UPC: ZDIGWL510
Digital Yacht USB Self Powered Extension Cable WL60/410
$48.99 $49.95
USB Self Powered Extension Cable (5M) for WL60/410
Daisy chain up to 3 cables for total 20m cable length on WL60 and WL410 systems.
Specifications:
- Box Dimensions: 1"H x 6"W x 9"L WT: 0.6 lbs
- UPC: 4002888428170
Digital Yacht HSC100 High Performance Fluxgate Sensor
$360.99 $369.95
HSC100 High Performance Fluxgate Sensor
Accurate compass heading data remains a fundamental parameter for marine navigation and the HSC100 uses fluxgate technology to deliver heading data for on board systems. Typical applications include enabling course up and true motion type displays on chart plotters, radar overlay onto electronic charts and stabilisation of radars when used for MARPA/ARPA target tracking. Integrated instrument systems can also benefit from having compass information to calculate real time tidal set and drift when interfaced with a log and GPS.
Features:
- High speed (10Hz) NMEA electronic fluxgate compass sensor
- Ideal for use with radar overlay and MARPA target tracking systems
- Industry standard NMEA 0183 HDG output
- Gimbaled to 45 degrees
- 12/24V DC operation with minimal power consumption
- Waterproof to IPx7 and suitable for external mounting on steel hulled vessels
- Automatic calibration routine and manual compass offset feature
- Additional AD10 heading output for interface with Furuno systems
- LED status indicator
- 15m interconnect cable
Most low cost heading sensors only output data at 1Hz (once per second) but the HSC100 outputs at 10Hz which is required for MARPA target tracking and accurate radar overlays.
The HSC100 is waterproof so it can be mounted externally on steel hulled vessels. It also features an automatic calibration routine to compensate for the effects of nearby magnetic influences. This involves turning the boat through 1.5 circles at a constant angular velocity whilst in calibration mode. Once completed, typical accuracies are within 0.5 degrees
Specifications:
- Box Dimensions: 3"H x 9"W x 13"L WT: 2.1 lbs
Digital Yacht AIS100 AIS Receiver
$194.99 $199.95
AIS100 Receiver
This value priced, entry level AIS receiver is Digital Yacht's most cost effective solution for adding AIS to your boat. Featuring the same dual channel receiver as the AIS200 range, but without the multiplexer, there is no compromise on performance and the AIS100 will outperform all other, inferior, single channel receivers.
For use with existing AIS compatible chart plotters, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. Connected to an existing VHF antenna (via a splitter) or to a dedicated AIS antenna, you can receive all AIS targets within 20 miles of your boat.
- Low cost entry level AIS receiver
- High performance dual-channel AIS receiver for use with existing plotter and radar systems
- High Speed NMEA output (38,400 baud)
- Requires VHF antenna or dedicated AIS antenna (available as optional accessory)
- Easy to install IP54 black box solution
Specifications:
- AIS Class: Both A & B
- Antenna Included: No
- Display Included: No
- GPS Included: No
- Box Dimensions: 3"H x 6"W x 6"L WT: 0.4 lbs
- UPC: 738435472382
Digital Yacht AISnet AIS Base Station
$487.99 $499.95
AISnet AIS Base Station
AISnet is a new AIS receiver for use as an AIS base station at home or in the office. Utilising the same high performance dual channel AIS receiver as the rest of the Digital Yacht range, AISnet also features an ethernet socket so that you can connect it to your broadband router and send AIS data to an on-line AIS tracking service.
There are now a large number of internet based web sites which offer a view of AIS equipped vessels on a background chart allowing users to check the position and identity of ships and yachts. If your home/office is close to the coast and you would like to contribute your data to one of these sites, simply register with the company and they will give you an IP address and Port number.
Using the setup program that Digital Yacht supply, it takes seconds to program the IP address and Port in to AISnet, which will immediately start sending your local AIS data seamlessly across the internet to be displayed on the site.
It is also possible to view the data, that AISnet is collecting, locally on your PC using the free SmarterTrack Lite software that Digital Yacht include with every AISnet. Simply plug the USB connector into your PC and the AIS data will appear on your PC and still be transmitted over the internet.
AISnet is supplied with a universal UK/Euro/US mains adaptor that provides a regulated 12v supply from 240v/110v AC mains.
KEY FEATURES
- AIS base station for Home of Office use
- Integrated ethernet network controller for supplying AIS data to online AIS websites
- High performance dual channel AIS receiver
- Simple configuration via free setup program
- USB Interface for simple Plug and Play connection to a PC
- Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter
- Universal Mains power supply included
- Simple "fit and forget" black box solution
Specifications:
- Box Dimensions: 4"H x 13"W x 18"L WT: 3 lbs
- UPC: 738435472412
Digital Yacht NMEA to Wireless Wi-Fi Adapter - 4800 Baud
$292.99 $299.95
NMEA to Wireless Wi-Fi Adapter - 4800 Baud
This innovative and cost effective wireless device creates its own 802.11b+g wireless access point which any other wireless device can connect to, such as a Smart Phone, Netbook or Laptop.
Connect it to any device or system that has an NMEA 0183 output and it will automatically read the data and transmit it wirelessly to another wireless device. The NMEA 0183 data is transferred using TCP/IP protocol to a suitably compatible application on the wireless device.
A number of Marine Navigation software packages support TCP/IP data transfer including;
- SeaPro (PC)
- Rose Point Coastal Explorer (PC)
- MacENC (Macs)
- iNavX (iPhone/iPad)
Only one device at a time can send/receive TCP/IP data with the WLN10.
- Wireless NMEA Data server (4800 baud)
- Reads NMEA 0183 data and transmits it wirelessly over 802.11b+g
- Can be fitted to any GPS or Instrument system that is outputting/inputting NMEA 0183 data at 4800 baud
- Supports Bi-Directional communication but must be at the same 4800 baud rate
- Creates an 802.11b+g wireless access point and then transmits data via TCP/IP link
- Fully compatible with popular iNavX navigation application for Apple mobile devices
- Easy to install IP54 black box solution
Digital Yacht NMEA to Wireless Wi-Fi Adapter - 38,400 Baud
$292.99 $299.95
NMEA to Wireless Wi-Fi Adapter - 38,400 Baud
This innovative and cost effective wireless device creates its own 802.11b+g wireless access point which any other wireless device can connect to, such as a Smart Phone, Netbook or Laptop.
Connect it to any device or system that has an NMEA 0183 output and it will automatically read the data and transmit it wirelessly to another wireless device. The NMEA 0183 data is transferred using TCP/IP protocol to a suitably compatible application on the wireless device.
A number of Marine Navigation software packages support TCP/IP data transfer including;
- SeaPro (PC)
- Rose Point Coastal Explorer (PC)
- MacENC (Macs)
- iNavX (iPhone/iPad)
If you are connecting the WLN10HS to an AIS receiver or transponder, then Digital Yacht's free iAIS app is downloadable from the Apple App Store, which will display an AIS radar type picture on your Apple device.
Only one device at a time can send/receive TCP/IP data with the WLN10HS.
- Wireless NMEA Data server (38400 baud)
- Reads NMEA 0183 data and transmits it wirelessly over 802.11b+g
- Can be fitted to any AIS unit or NMEA Multiplexer that is outputting/inputting NMEA 0183 data at 38400 baud
- Supports Bi-Directional communication but must be at the same 38400 baud rate
- Creates an 802.11b+g wireless access point and then transmits data via TCP/IP link
- Fully compatible with popular iNavX navigation application for Apple mobile devices
- Easy to install IP54 black box solution
Digital Yacht AIT2000 Class B Transponder w/GPS Antenna Includes Programming Fee
$643.99 $659.95
AIT2000 Class B
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. **
The AIT2000 uses the latest AIS Transponder technology to squeeze more performance and interfacing options in to a housing that is half the size of our previous generation transponder.
This ultra-compact Class B Transponder has three outputs; NMEA 0183, NMEA 2000 and USB connection, allowing it to work with every AIS compatible chart plotter or software package on the market today. Featuring a remote silence button option, two NMEA 0183 Inputs and Outputs, four status LEDs and rugged vibration-proof mounting brackets, the AIT2000 is the third generation of Digital Yacht AIS transponder and replaces the very popular AIT1000.
Configuration of your vessel's fixed data, such as MMSI, call sign, boat name, dimensions etc. is made easy with the included Windows and Mac compatible proAIS2 software. Once configured, the unit will provide AIS data to a PC or Mac running suitable navigation software or a dedicated chart plotter, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units.
As well as transmitting your own vessel's position so that other AIS equipped vessels know where you are, the AIT2000, when connected to an existing VHF antenna (via a splitter) or dedicated AIS antenna, will receive all AIS targets within range of your boat - typically up to 30NM.
With two industry standard NMEA 0183 outputs, our own N2Net connector for plugging in to an NMEA 2000 network and a simple plug and play USB connection to a PC, the AIT2000 is the perfect AIS transponder solution for all light marine vessels up to 300 tons.
Features:
- Latest generation AIS technology - featuring a brand new AIS transponder (Class B) design
- Ideal for use with existing plotter and radar systems
- Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS)
- USB Interface for simple plug and play connection to a PC or Mac
- Includes N2Net interface and cable for connection to NMEA 2000 network
- High speed NMEA output (38,400 baud) - compatible with industry standard plotters
- Comes complete with GPS antenna with integral 1"x14TPI thread monut
- Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter (SPL250)
- Remote Silence Switch option
- Easy to install black box solution
NOTE - AIS target range, like VHF range is dependent upon a number of installation factors such as; antenna gain, antenna height and size of ground plane. Ranges in excess of 20 miles should be possible if all of these factors are perfect.
Specifications:
- AIS Class: B
- Antenna Included: Yes
- Display Included: No
- Box Dimensions: 4"H x 9"W x 13"L WT: 3.7 lbs
- UPC: ZDIGAIT2000
Owner's Manual (pdf)
Digital Yacht AIS100P Pro AIS USB Receiver
$243.99 $249.95
AIS100P Pro AIS USB Receiver
Value priced, high performance, dual channel black box AIS receiver with USB output. Now includes NMEA0183 input multiplex function - combines NMEA 4800 baud data with Ais data and makes all data available on the USB output. Supplied with Windows, Mac, and Linux driver disk. Requires connection to 12/24v supply and connection to suitable VHF antenna or splitter.
Specifications:
- Box Dimensions: 2"H x 6"W x 10"L WT: 0.65 lbs
- UPC: 4044537094985
Quick Guide (pdf)
Digital Yacht NavLink NMEA 200 Wireless Data Server
$536.99 $549.95
NavLink
With more and more equipment now using NMEA 2000 networking, being able to easily connect the network data to mobile devices such as smart phones, tablets and laptops is becoming an important consideration.
The WLN2Net is a simple and cost effective wireless device that converts NMEA2000 data into a wireless data feed that can be received by any mobile wireless device. Using standard NMEA data formats, the WLN2Net is compatible with all software applications that support TCP (single device) or UDP (multiple devices) data transfer.
A number of Marine Navigation software packages support TCP/UDP data transfer including:
- SmarterTrack (PC)
- SeaPro (PC)
- Rose Point Coastal Explorer (PC)
- MaxSea (PC)
- Nobeltec (PC)
- MacENC (Macs)
- iNavX (iPhone/iPad)
If you are connecting the WLN2Net to an AIS receiver or transponder, then Digital Yacht's free iAIS app is downloadable from the Apple App Store, which will display an AIS radar type picture on your Apple device.
Features:
- NMEA 2000 Certified Wireless Data server
- Reads NMEA 2000 data and transmits it wirelessly over 802.11b+g
- Can be fitted to any NMEA 2000 network with integral cable (male micro connector)
- Supports Bi-Directional communication for driving an Autopilot
- Uses standard NMEA data for maximum compatibility with software applications
- Free iAIS App for iPhone, iTouch or iPad
- Creates a wireless access point and then transmits data via TCP/UDP link
- TCP allows single device connection while UDP allows multiple devices to receive the data
- Single "plug and play" connection to the NMEA2000 network, provides power and data
- Optional USB connection available for providing NMEA2000 data to the boat's nav computer
- Fully compatible with popular iNavX navigation application for Apple mobile devices
- Easy to install IP54 black box solution
Quick Guide (pdf)
Digital Yacht iNavHub
$487.99 $499.95
iNavHub Wireless NMEA Router
iNAVHub combines wireless networking and wireless NMEA data transfer in one simple to install box. Similar to our popular iNavConnect product, it creates a wireless network onboard the boat that any wireless device can connect to.
Once connected iphones, iPads, PCs, etc, can receive NMEA0183 data wirelessly for use in iNavX and other navigation apps, whilst also sharing the long range internet connection created by Digital Yacht?s WL510 product..
iNAVHub is designed to fully integrate with Digital Yacht's latest WL510 long range Wi-Fi adaptor. Simply plug the WL510 in to the dedicated network socket and when you arrive in port and connect the WL510 to the marina?s hotspot, everyone on board will be able to share the long range internet connection.
Features:
- 12/24v DC Powered Wireless Hub
- All-in-one solution for distributing your wireless internet and NMEA data
- Integrates with Digital Yacht?s latest WL510 long range Wi-Fi Adaptor
- When connected to WL510, will allow the long range internet connection to be shared with everyone on board
- Includes an NMEA interface that outputs NMEA0183 data wirelessly to multiple iPhones, iPads, PCs, etc. via UDP
- Creates an 802.11n wireless network onboard with full WEP/WPA/WPA2 encrypted password protection
- 5dB detachable antenna
- Easy to install IP54 black box solution
Specifications:
- Box Dimensions: 4"H x 9"W x 13"L WT: 2.7 lbs
Quick Guide (pdf)
Owner's Manual (pdf)
Digital Yacht AIS Life Guard Man Overboard Alarm System
$243.99 $249.95
AIS Life Guard
The AIS Life Guard is the world's first AIS Man Overboard Alarm designed to work with the new generation of AIS SARTs that have recently been approved for global use by the IMO.
Many existing AIS compatible chart plotters do not fully support AIS SARTs but with the AIS Life Guard connected to an AIS transponder or AIS receiver, you can have a complete working AIS SART man overboard system. Operation is automatic, simply connect the two wire NMEA input on the AIS Life Guard to the NMEA output of your AIS and it will listen to all AIS traffic.
As soon as an AIS SART transmission is detected the AIS Life Guard will sound its internal 95dB alarm and display a red warning light. For larger installations, it can also be connected to an external alarm (not supplied) so that the whole boat is immediately alerted.
The AIS Life Guard detects both message 1 and message 14, the two AIS messages reserved for AIS SARTs and will also give a short three beep alarm if it detects an AIS SART test message, great for checking correct operation of your AIS SARTs prior to a voyage.
All Digital Yacht AIS receivers and transponders are compatible with the AIS Life Guard and it is designed to operate on 12v or 24v DC systems.
Features:
- World's first dedicated AIS Man Overboard Alarm system
- Listens to AIS data on NMEA0183 Input
- Alarms when AIS SART message 1 and 14 are detected
- Internal 95dB buzzer with option to drive external alarm (not supplied)
- Audible and Visual Alarms
- Push button to silence alarm (short press) and reset alarm (long press)
- Easy to install IP54 black box solution
- Box Dimensions: 4"H x 7"W x 10"L WT: 0.7 lbs
Specifications:
Quick Guide (pdf)
Digital Yacht iNAVConnect Wireless Wi-Fi Router
$243.99 $249.95
iNAVConnect Wireless WiFi Router
iNAVConnect is an all in one solution for setting up a wireless network on your boat. With direct connection to the boat's 12v or 24v DC, higher gain 5dB antenna and a rugged IP54 black box, iNAVConnect can be easily fitted to any GRP or wooden hulled vessel.
Pre-configured and optimized for connection to a Raymarine E Series network, iNAVConnect also makes it very easy to setup wireless Waypoint and Route transfer using the "Plotter Sync" function in the Navionics iPhone/iPad App. With iNAVConnect installed, waypoints and routes can be instantly transferred between the iPhone/iPad and your Raymarine E Series plotter.
Full integration with Digital Yacht's latest WL510 long range Wi-Fi adaptor is also possible. Simply plug the WL510 in to the dedicated network socket and when you arrive in port and connect the WL510 to the marina's hotspot, everyone on board will be able to share the long range internet connection.
*NOTE - iPad and E series not included!
Features:
- 12/24v DC Powered Wireless Router
- Pre-configured and optimised for connection to Raymarine E Series network
- Allows Navionics "Plotter Sync" feature to wirelessly transfer routes and waypoints to E series plotter
- Integrates with Digital Yacht's latest WL510 long range Wi-Fi Adaptor
- When connected to WL510, will allow the long range internet connection to be shared with everyone on board
- Creates an 802.11n wireless network onboard with full WEP/WPA/WPA2 encrypted password protection
- 5dB detachable antenna
- Easy to install IP54 black box solution
Specifications:
- Wireless: Yes
- Box Dimensions: 4"H x 9"W x 13"L WT: 2.25 lbs
- UPC: ZDIGIN
Digital Yacht GPS150 USB DualNav GPS/GLONASS Sensor - Self-Powered USB Interface
$253.99 $259.95
Digital Yacht GPS150 USB DualNav GPS/GLONASS Antenna - Self Powered USB Interface
The GPS150 DualNav positioning sensor combines a super accurate 50 channel GPS with GLONASS, the Russian funded satellite positioning system that is now on line and providing an excellent back up or alternative to GPS. This "smart" sensor will automatically switch between the systems or the user can manually select the most appropriate for their activity. The GPS150 will also be able to utilise the European funded Galileo positioning system when it comes online (IOC - Initial Operation Capability in 2018).
The implementation of GLONASS as an additional satellite positioning system is probably the biggest step change in maritime navigation since GPS was fully augmented back in the mid 90's. Digital Yacht's GPS150 utilises the industry standard NMEA data format allowing older chart plotters as well as current generation products to take advantage of this new technology.
The GPS150 also allows the user to select a variety of different NMEA baud rates (4800, 38400 and 115200) to allow interfacing with legacy and current systems. It also supports a new TurboNavT mode which will appeal to racing yachtsmen and performance users where GPS/GLONASS data is output at 10Hz (10 x faster update than normal) and with an interface speed of 115200 baud which is 24 x the speed of normal NMEA data. This massively improves slow speed navigation data as well as providing the best course and speed data in a dynamic situation.
The GPS150 houses all the electronics in its compact 75mm antenna and has a single multi core cable for power and data. Power consumption is just 30mA at 12V. It can be used as a simple positioning sensor for plotter or VHF DSC systems as well as a precision, high speed sensor for performance sailing/super yachts. The GPS150 can also connect to the WLN10 wireless interface to allow data to be sent to mobile devices such as iPhones, iPads and Tablets. There is also a USB interface for PC and MAC users (ZDIGUSBNMEA).
The GPS150 is field programmable for multi-mode operation. There's no complicated PC hookup or software to install - simply unscrew the top of the waterproof antenna to access the programming switches. The installer can set the NMEA 0183 baud rate (4800, 38400 or 115200), auto or manual GPS/GLONASS operation and the update rate - 1/6/10Hz (also dependent upon NMEA baud rate). This arrangement also allows users to fit two GPS150 sensors with one dedicated to GPS operation and one for GLONASS operation. These can then feed different NMEA input ports on a chart plotter to allow flexible switching between the two systems.
Features
- 50 channel precision GPS/GLONASS positioning sensor
- Just 75mm in diameter and designed to fit industry standard 1" mounts
- Ultra tough, waterproof construction
- NMEA output configurable for 4800, 38400 and 115200 baud
- Selectable update rates from 1 to 10Hz
- Configurable in the field using simple DIP switches inside the antenna
- TurboNav mode offers super fast updates to optimise positioning information in slow and high speed applications
- WAAS/EGNOS/SBAS enabled for sub 1m accuracy
- User selectable GPS/GLONASS mode or auto selection
- Ultra low 30mA power consumption (at 12V DC)
- 5-30V DC power input
Quick Guide (pdf)
Digital Yacht PilotLINK AIS Interface Class A
$311.99 $319.95
PilotLINK
PilotLINK is a wireless interface for Class A AIS systems. All Class A transponders share a common "Pilot Plug" connector that PilotLINK connects directly to via a 1m cable. PilotLINK then creates a wifi navigation network on board the vessel which allows AIS and GPS data from the Class A to be sent directly to any connected mobile devices such as phones or tablets. It's compatible with iOS and Android systems (depending upon app utilised) as well as PC & MAC based systems.
PilotLINK is stand alone and can operate from its internal, user replaceable, dry battery (PP3) for up to 15 hours. Alternatively, it can connect via a standard mini USB connector to any USB style power pack or AC/DC USB power adaptor that are readily available from many 3rd parties.
PilotLINK is compatible with a wide variety of iPhone/iPad or Android apps. iAIS is a free of charge app from Digital DeepSea which gives a basic AIS radar type display and target information, but to make the most of PilotLINK we recommend the use of a more full featured app aimed at comercial Pilots such as; iSailor (Transas), SEAiq Pilot and iNavX, or any other suitable 3rd party apps available through the Apple App store or Google Play on Android.
PilotLINK can also interface with a PC or MAC. Popular navigation programs such as SmarterTrack, SeaPro, RosePoint and MaxSea for PCs or macENC for a Mac are all compatible. PilotLINK ships with a complimentary copy of SmarterTrack Lite - a full featured AIS display program for Windows PCs.
Features:
- Wireless Interface for Class A AIS Transponders
- Reads GPS and AIS data directly from the transponders Pilot Plug
- Supports Bi-Directional communication for configuring the transponder
- Uses standard NMEA data for maximum compatibility with software applications
- Free iAIS App for iPhone, iTouch or iPad
- Complimentary copy of SmarterTrack Lite for PCs
- Creates a wireless access point with a typical range of 30m
- Transmits data via TCP/UDP link
- TCP allows single device connection while UDP allows multiple devices to receive the data
- Fully compatible with many popular Apps and Software programs
- Rugged handheld design can be fitted with optional rubber jacket
- Powered from internal 9v PP3 battery or optional external USB power source
Specifications:
- AIS Class: a
- Box Dimensions: 2"H x 6"W x 7"L WT: 0.55 lbs
- UPC: ZDIGPLIN
Quick Guide (pdf)
Digital Yacht AIT1500 Class B AIS Transponder w/Built-In GPS
$584.99 $599.95
AIT1500 Class B AIS Transponder w/Built-In GPS
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is
required along with the vessel master or owner's signature on the completed
programming form.**
Designed specifically to bring the benefits of Class B AIS to smaller vessels, it uses a high sensitivity internal GPS antenna to save on space and cut down on installation time. Simply connect to power and a plotter, plug in a VHF antenna and you're in business.
The regulations for AIS demand that the Class B transponder has to incorporate itsown GPS positioning receiver which normally involves fitting an external antenna. TheAIT1500 incorporates a high sensitivity GPS antenna within its compact case whichsaves on antenna clutter and makes for a speedy installation. It's ideal for fitting onsmaller vessels and tenders. It uses a NMEA0183 interface for simple connectionto the vast majority of AIS compatible chart plotters and also has a separate 4800baud GPS data output for the DSC VHF if required. It consumes less that 2W powerand can operate on 12/24V systems. It also features a silence capability so the AIStransmissions can be muted while continuing to receive AIS traffic.
There is a USB interface for programming as well as for PC/MAC based navigation.It's compatible with Digital Yacht's NavLink MAC app and SmarterTrack PC navigationsystem.
GPS signals will pass through plastic, glass and GRP so it will be able to be mountedbelow decks on many boats. A dedicated VHF antenna is required for the AIS or asuitable VHF-AIS antenna splitter such as the SPL2000. It can also connect to theWLN10.
Features:
- Advanced AIS design for the best performance
- Waterproof compact enclosure
- Built in internal GPS antenna
- Dual NMEA 0183 outputs at 4800/38400 baud
- USB interface
- PC & MAC programming software included
- NMEA input multiplex function
- Silence switch option
- Supplied with programming and utilities CD
Specifications:
- GPS Included: Yes
- AIS Class: B
- Box Dimensions: 4"H x 7"W x 10"L WT: 1.4 lbs
Digital Yacht DTV100 Marine HD TV/FM Antenna
$194.99 $199.95
DTV100 Marine HD/FM Antenna
The DTV100 HD TV antenna from Digital Yacht allows you to access free digital TV services on board. With a super sensitive design and hi gain amplifier, it sucks in even the weakest of signals. It's omni-directional too so there's no complicated aligning plus it will also provide a feed for a FM stereo radio.
The DTV100 is a high performance, omni-directional TV antenna providing a great signal for on board HD TV systems. Start taking advantage of free HD digital TV entertainment today.
Digital terrestrial TV (even in HD) can now be received while afloat with a new TV antenna from Digital Yacht. Called the DTV100, it features a highly sensitive omni-directional design and hi gain (-7 to 29dB amplifier) to pick up even the weakest of signals. It can also feed a FM stereo. Start enjoying a few home luxuries on board today.
The slick DTV100 TV antenna picks up national free to view HD TV signals and allows a range of popular channels to be viewed on board thanks to its sensitive omni-directional design.
Features:
- Very high performance omnidirectional marine TV antenna
- Global reception capability of latest DVB/HDTV signals
- TV and FM radio outlet
- Below deck mounted amplifier with -7dB to +29dB gain
- Pole or standard 1" adaptor mounting capability
- Supplied with 10m coax
- Optional dual TV outlet amplifier
- Just 280mm diameter
- Exceptional performance for an omni-directional TV antenna
Designed For Easy Installation & Performance
- Waterproof to IP68 and ultra tough UV resistant ABS casing
- Antenna supports vertical and horizontal polarisation plus FM radio
- Adaptors for antenna supplied to fit standard pole or 1" threaded mounts from 3rd parties
- Single RG6 coax feed to below deck amplifier
- Below deck amplifier and splitter provides -7 to 29dB gain adjustment. 12/24V
- Optional amplifier provides 2nd TV output for multi cabin installtion
Specifications:
- Cable Length (Feet): 10m
- Color: White
- DB Gain (dB): -7dB to +29dB
- Box Dimensions: 10"H x 12"W x 13"L WT: 4 lbs
- UPC: ZDIGDTV100
Brochure (pdf)
Digital Yacht NTN10 NMEA To Ethernet Adapter
$341.99 $350.00
NTN10 NMEA To Ethernet Adapter
The Solution for NMEA to Network Interfacing
Welcome on board - the Digital Yacht NTN10 NMEA to Ethernet server.
It's simple to install. Just connect power and NMEA 0183 data and program using the supplied software for a specific TCP/IP or UDP address to suit your application. It can also be programmed for 4800 or 38400 baud NMEA data.
Digital Yacht's NTN10 can be used on board superyachts where Captains and Crew want the benefit of NMEA data for navigation apps like iNavX or NavLink. Connect to the on board AIS and instrument system and realtime NMEA data can be dropped into the existing boat network allowing one log-on for both internet data and NMEA. Crew can now roam freely, connected to the existing boat network, with their favorite app using live data and utilise their tablet or iPad for navigation around the boat. If multiple NMEA streams are required then you can utilise the Digital Yacht MUX100 NMEA multiplexer.
Digital Yacht WL70 Wi-Fi Access System
$194.99 $199.95
WL70 Wi-Fi Access System
The WL70 Wi-Fi antenna brings reliable Wi-Fi connectivity to any on board PC, MAC, LINUX or Raspberry Pi computer.
More and more boaters want access to the internet afloat. Marinas and ports as well as a large number of cafes, hotels, restaurants and service providers offer wi-fi connectivity but you may just miss that vital connection if you're moored or anchored away from the dock - especially if you're below decks about to enjoy a movie or catch up on email. The WL70 can provide connections up to about + mile depending upon conditions.
The WL70 features a very high performance 15dBm, 1.29m long antenna to suck in the weakest of signals, an internal low noise, high sensitivity modem and a 5m (15') cable that allows simple plug `n play connection via a high speed USB interface. It's threaded base, fits a standard 1" (14TPI) VHF type mount (not supplied) and being fully waterproof the WL70 can be permanently mounted outside or just taken out into the cockpit when moored for temporary installation.
Even if your computer already has an internal Wi-Fi adaptor, this can be disabled and you can take advantage of the superior range (and speed) that this system will offer.
Wi-Fi range depends on many local factors, but Digital Yacht has seen ranges of up to 1 km with this low cost system. In general, using an internal Wi-Fi adaptor typically found on a notebook, you'll be lucky to find the signal at the end of the dock, so if you plan to access the internet whilst on board, the WL60 could be the solution for you.
Features:
- 802.11n high sensitivity Wi-Fi modem
- High gain 15dBm omni-directional antenna (1.29m high)
- Will fit to a standard VHF type mount 1" x 14TPI thread (not supplied)
- USB bus powered via integral 5m (15') cable
- Windows XP/Vista/7/8/10 compatible
- Mac OSX 10.4 to 10.10 (Yosemite) compatible
- Compatible with all popular LINUX distributions including Raspberry Pi
Specifications:
- Antenna Band: Wi-Fi
- Color: White
- Box Dimensions: 3"H x 3"W x 53"L WT: 3 lbs
Digital Yacht DTV100 Dual TV Amplifier
$68.99 $69.95
DTV100 Dual TV Amplifier
The DTV100 expands connection to (2) TVs and a FM radio. The DTV100 is an Omni-Directional HDTV Antenna with 12/24V DC and F-Type Connectors.
Features:
- Supplied with 10m/33ft RG6 coax cable assembly from antenna to controller
- Antenna supplied with pole adaptor and 1" threaded adaptor for standard 1" x 14 TPI mounts
- Rear stud or front panel screw mount
- 12/24V operation (Typically 20-60mA)
- Standard F connectors
Brochure (pdf)
Digital Yacht WL70R System w/iKConnect
$438.99 $449.90
WL70R System with iKConnect
The system uses the well proven, WL70 1.25m wifi antenna and ships complete with a compact, DC powered wireless router called iKConnect. This creates a local wifi network on board the boat allowing mobile devices like phones, tablets and laptops to share the connectivity of the long range wifi antenna - effectively allowing multiple devices and users to share the internet connection.
The WL70 features a hi power modem integrated into the rugged 15dBm antenna. It's self powered from a USB connection - either direct to a PC/MAC or via the iKConnect router in the new WL70R bundle making installation really easy.
Features:
- Rugged 1.25m 15dBm antenna with industry standard 1" mount compatability
- Super compact iKConnect router with direct 10-18V DC power connection
- Simple to use web interface for setting up and connecting to hotspots
- Offers typically 15-20x normal wifi connection range and maximizes speed
- iKConnect creates an 802.11n wireless network onboard with full WEP/WPA/WPA2 encrypted password protection
- Detachable 5dBi antenna on iKConnect router to footprint boats up to 25m
- LAN and WAN connections for network expansion and other applications - compatible with iKommunicate too
- Also compatible with FUSION marine audio network for FUSION app audio control
- 3G/4G USB modem support
More and more boaters want access to the internet afloat. Marinas and ports as well as a large number of cafes, hotels, restaurants and service providers offer wifi connectivity but you may just miss that vital connection if you_re moored or anchored away from the dock _ especially if you_re below decks about to enjoy a movie or catch up on email. The WL70 can offer reliable and fast connections up to about + mile/1km depending upon conditions. For ranges up to 5-7NM, the more powerful WL510 is available.
Specifications:
- Box Dimensions: 3"H x 3"W x 53"L WT: 3.4 lbs
Brochure (pdf)
Digital Yacht iKConnect Wi-Fi Router
$243.99 $249.95
iKConnect Wi-Fi Router
"The perfect mini router for our USB WL70 Long Range Wi-Fi adaptor or our latest iKommunicate Signal K Gateway"
iKConnect is a compact but powerful wireless router that provides a cost effective way to setup a wireless network on your boat. With direct connection to the boat's 12v DC, high gain 5dB antenna and a small foot-print, simple to install black box, iKConnect can be easily fitted to any vessel.
Pre-configured and optimised for use with our USB WL70 Long Range Wi-Fi antenna, the combination of an iKConnect with a WL70 is the lowest cost complete WI-Fi solution that Digital Yacht have ever released and is an ideal way to connect your non-3G iPad or Android tablet to the internet when in harbour. With a simple web interface that controls the WL70 to scan and connect to the marina hotspot, iKConnect makes getting an internet connection on your boat a breeze.
iKConnect is also the perfect accessory for our latest iKommunicate Signal K gateway allowing mobile devices to wirelessly recieve the Signal K or NMEA data anywhere on the boat. In fact the combination of iKConnect, iKommunicate and a WL70 allows the boat to have a single wireless network that provides both navigational data and internet access, without the hassle of switching wireless networks.
For ultimate long range Wi-Fi connectivity simply swap the WL70 for Digital Yacht's top of the range WL510 system which seamlessly connects to the iKConnect WAN socket.
Features:
- 12v DC Powered Wireless Router
- Simple to use Web Interface for setting up and connecting to hotspots
- Pre-configured and optimised for connection to Digital Yacht's latest WL70/510 long range Wi-Fi Adaptors
- Ideal accessory to our iKommunicate Gateway to get Wireless Signal K or NMEA data
- When connected to WL70/510, will allow the long range internet connection to be shared with everyone on board
- Creates an 802.11n wireless network onboard with full WEP/ WPA/WPA2 encrypted password protection
- 5dB detachable antenna
- USB interface for WL70 and a WAN connection for WL510
- Easy to install black box solution
Specifications:
- Box Dimensions: 3"H x 6"W x 7"L WT: 0.5 lbs
Digital Yacht SPL1500 Antenna Splitter VHF/AIS
$272.99 $279.95
SPL1500 Antenna Splitter VHF/AIS
An AIS receiver or transponder requires a VHF antenna, but Digital Yacht’s SPL1500 AIS-VHF antenna splitter allows an existing antenna to be used for both the AIS and VHF (DSC). Unlike most simple splitters, it can also be used with a class B transponder system and it incorporates special circuitry to ensure safe operation of the two transmitting devices.
The unit has three simple connections - one input for the main VHF antenna and then outputs for the AIS receiver/transponder and another for the DSC VHF. It utilizes Digital Yacht’s ZeroLoss™ technology, to ensure the very best possible reception and transmission from all devices. Most importantly it is also fail safe, so should the unit ever stop working or lose power, it will not affect the main VHF operation. Until now, Digital Yacht, have recommended a dedicated antenna for a receiver or transponder. However, with the new this new ZeroLoss™ technology, we can now offer a solution that greatly simplifies installation whilst maintaining performance.
The unit is waterproof and matches the aesthetics of the current AIT1500, so can easily be integrated into any vessel. It is suitable for operation on 12V or 24V systems and features three status LEDs that show the unit is powered correctly and when the AIS or VHF transmits.
Features:
- Enables an existing VHF antenna to be used for both the standard VHF and AIS system
- ZeroLoss™ technology for exceptional performance
- Works with all Class B transponders and receivers
- Supplied with power cable, PL259-PL259 cable assembly and BNC-BNC cable assembly for easy installation (all cables 0.75m long)
- 12V or 24V 0peration and low power consumption
- Fail safe operation
- Same size and design as the AIT1500
- Makes installation of an AIS receiver or transponder very quick and simple
- Saves on additional antenna clutter
Specifications:
- Box Dimensions: 4"H x 7"W x 10"L WT: 1.6 lbs
Digital Yacht AIS100 USB AIS Receiver
$224.99 $229.95
AIS100 Receiver (USB)
This value priced, entry level AIS receiver is Digital Yacht's most cost effective solution for adding AIS to your PC. Featuring the same dual channel receiver as the AIS200 Pro, but without the NMEA 0183 output and multiplexer, there is no compromise on performance and the AIS100 will out perform all other, inferior, single channel receivers.
For use with any AIS compatible PC navigation software, such as the latest SmarterTrack, MaxSea, Nobeltec, SeaPro and RosePoint applications. Connected to an existing VHF antenna (via a splitter) or to a dedicated AIS antenna, you can receive all AIS targets within 20 miles of your boat.
- Low cost entry level AIS receiver
- High performance dual-channel AIS receiver for use with AIS compatible PC navigation software
- USB Interface for simple Plug and Play connection to a PC
- Requires VHF antenna or dedicated AIS antenna (available as optional accessory)
- Easy to install IP54 black box solution
Specifications:
- Antenna Included: No
- Display Included: No
- Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs
- UPC: ZDIGAIS100US
Quick Guide (pdf)
Digital Yacht iAIS f/iPhone & iPad
$487.99 $499.95
iAIS Wireless Receiver
The world's first wireless AIS receiver that links wirelessly with the latest iPhone, iPad and iTouch devices. Consisting of a high performance dual channel AIS receiver, an integrated 802.11b+g wireless access point plus a free app downloadable from the Apple App Store, the iAIS brings AIS data to a whole new generation of mobile devices.
iAIS also multiplexes any other NMEA data that is available on board the boat - for instance GPS, depth, speed and wind etc. All of this data is combined with the AIS data into a single wireless feed, that becomes available on any compatible application. By using the boat's own GPS, even an iTouch or iPad that does not have an internal GPS can now be used for navigation and superior performance will also be seen on an iPhone, which some users have complained suffers from jitter or poor lock-on with its internal GPS.
As well as sending data wirelessly, the iAIS also has an NMEA0183 and USB interface so that you can output data to a PC (via USB) and a dedicated plotter (via NMEA) for larger installations.
The free iAIS app is available from the App store and is a simple AIS display program. For more advanced use, Digital Yacht recommends the iNavX app (www.inavx.com). Compatible with Navionic's charts, iNavX provides a complete set of navigation functions that turns your Apple device into a full function electronic chart plotter. It supports waypoints, routes and tidal data and is beautifully simple to use. It even overlays GRIB weather data. iNAVx sell and support this app directly.
- World's first wireless AIS and NMEA Data server
- Tri-output; Wi-Fi, NMEA 0183 and USB
- Multiplexed NMEA input for wireless NMEA data feed of boat's instrument and GPS data
- Free iAIS App for iPhone, iTouch or iPad
- Integrated 802.11b+g wireless access point
- Fully compatible with popular iNavX navigation application for Apple mobile devices
- Rugged IPX5 aluminium housing
- Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter
- Simple "fit and forget" black box solution
NOTE - AIS target range, like VHF range is dependent upon a number of installation factors such as; antenna gain, antenna height and size of ground plane. Ranges in excess of 20-30 miles should be possible if all of these factors are perfect.Specifications:
- GPS Included: Yes
- Display Included: No
- Antenna Included: No
- Box Dimensions: 3"H x 8"W x 13"L WT: 2.1 lbs
- UPC: ZDIGiAI
Digital Yacht WindSense - Wi-Fi Wireless Wind System
$536.99 $549.95
WindSense - Wi-Fi Wireless Wind System
WindSense is a wireless wind system designed to allow iPads, tablets, SmartPhones and PCs to display accurate apparent wind speed and direction. It features a high quality, precision mast head sensor with 20m cable that connects to a below decks interface unit providing a wifi and NMEA 0183 wired connection. Existing NMEA compatible sensors can also be connected to the NMEA input to allow the wireless network to share other available on board instrument data. It's compatible with a wide range of apps for iOS and android. The built in wifi will typically footprint a GRP boat up to 30m.
Features:
- Stand alone or networkable (via NMEA 0183) wind system with precision mast head unit
- Wired connection with super-thin cable from MHU to below deck interface with wireless WiFi and wired NMEA connections
- Ultra tough Igildur™ mast head unit bearings for exceptional life and corrosion resistance
- Full range of apps for iOS & Android plus compatible with multiple PC and MAC apps
- Support for up to 7 Wi-Fi connected devices - use multiple smart phones, iPads or tablets as a display at the helm, chart table or on deck
NMEA 0183 output
- NMEA 0183 (4800 or 38400 baud) input with multiplex facility for WiFi connection
- Wi-Fi can be standalone or joined to existing network
- Minimal power consumption
- Optional NMEA 2000 interface
Installation is easy with an ultra thin mash head unit cable with removable connector which plugs directly into the interface unit.
Specifications:
- Box Dimensions: 5"H x 17"W x 20"L WT: 9.8 lbs
Brochure (pdf)
Digital Yacht NMEA Adapter f/PC
$58.99 $59.95
NMEA Adapter f/PC
The USB to NMEA Serial Adaptor cable is a simple and effective method for connecting NMEA 0183 compatible marine equipment to a PC. Each cable contains a small internal electronic circuit board, housed in the USB connector. This circuitry provides full bi-directional conversion of the serial data and also includes Tx and Rx LEDs which give a visual indication of data traffic on the cable.
The other end of the cable is bare, tinned wire ended connections which can be quickly connected to the NMEA 0183 compatible equipment with suitable connector block or terminals. The cable is FCC, CE and RoHS compliant.
The USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.8m long and supports a data transfer rate up to 1 Mbaud. Drivers are available for WinXP, Vista, Win7, LINUX and Mac OS X.
Quick Guide (pdf)
Digital Yacht AIT1500 NMEA2000 Class B AIS
$584.99 $599.95
AIT1500 NMEA2000 Class B AIS
"An easy to install Class B AIS transponder with plug 'n play NMEA 2000 interface. Built in GPS antenna and ideal for use on smaller yachts and boats like RIBs and center consoles."
The AIT1500N2K is a Class B AIS transponder with built in GPS antenna to make installation as easy as possible. The super sensitive design allows below deck mounting on GRP boats such as small yachts, RIBs and center consoles and cuts down on antenna clutter. It connects to your boat's electronics via a plug 'n play NMEA 2000 connection and power is also taken from the NMEA 2000 backbone. Simply connect a VHF antenna (or use our SPL2000 AIS-VHF antenna splitter) and you're equipped with Class B AIS.
Once installed, your AIS compatible plotter will show an overlay of targets and you'll transmit your position every 30 seconds when underway to other AIS users. There's also a USB interface for PC/MAC connectivity which can be used for programming the transponder with your boat details.
The AIT1500N2K features a waterproof and tough enclosure with 4 LED indicators to show the status of the transponder.
Features:
- Shares the same latest generation AIS technology as our AIT2000 and AIT3000 units
- Plug and Play NMEA2000 interface (takes power from network)
- Compatible with all AIS ready chart plotters
- Internal GPS antenna for easy installation on fibreglass (GRP) hulled boats
- Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS)
- USB Interface for simple plug and play connection to a PC or Mac
- Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter (SPL2000)
- Supplied with programming software for PC/Mac and SmarterTrack Lite for Windows
- Easy to install black box solution
NOTE - AIS target range, like VHF range is dependent upon a number of installation factors such as; antenna gain, antenna height and size of ground plane. Ranges in excess of 20 miles should be possible if all of these factors are perfect.
Specifications:
- AIS Class: B
- Antenna Included: Yes
- Display Included: No
- GPS Included: Yes
- Box Dimensions: 4"H x 7"W x 10"L WT: 1.2 lbs
Digital Yacht NavLink Plus NMEA200 to Wi-Fi Server USB
$584.99 $599.95
NavLink Plus
With more and more equipment now using NMEA 2000 networking, being able to easily connect the network data to mobile devices such as smart phones, tablets and laptops is becoming an important consideration.
The WLN2Net is a simple and cost effective wireless device that converts NMEA2000 data into a wireless data feed that can be received by any mobile wireless device. Using standard NMEA data formats, the WLN2Net is compatible with all software applications that support TCP (single device) or UDP (multiple devices) data transfer.
A number of Marine Navigation software packages support TCP/UDP data transfer including:
- SmarterTrack (PC)
- SeaPro (PC)
- Rose Point Coastal Explorer (PC)
- MaxSea (PC)
- Nobeltec (PC)
- MacENC (Macs)
- iNavX (iPhone/iPad)
If you are connecting the WLN2Net to an AIS receiver or transponder, then Digital Yacht's free iAIS app is downloadable from the Apple App Store, which will display an AIS radar type picture on your Apple device.
NOTE: NavLink+ includes an additional USB interface for supplying data from the NMEA2000 network to a PC or Mac.
Features:
- NMEA 2000 Certified Wireless Data server
- Reads NMEA 2000 data and transmits it wirelessly over 802.11b+g
- Can be fitted to any NMEA 2000 network with integral cable (male micro connector)
- Supports Bi-Directional communication for driving an Autopilot
- Uses standard NMEA data for maximum compatibility with software applications
- Free iAIS App for iPhone, iTouch or iPad
- Creates a wireless access point and then transmits data via TCP/UDP link
- TCP allows single device connection while UDP allows multiple devices to receive the data
- Single plug and play connection to the NMEA2000 network, provides power and data
- Optional USB connection available for providing NMEA2000 data to the boat's nav computer
- Fully compatible with popular iNavX navigation application for Apple mobile devices
- Easy to install IP54 black box solution
Specifications:
- Box Dimensions: 4"H x 7"W x 70"L WT: 1.2 lbs
- UPC: ZDIGWLN2NETP
Quick Guide (pdf)
Digital Yacht AIT3000 Nucleus Class B AIS Transponder
$1,169.99 $1,199.95
AIT3000 Nucleus Class B AIS Transponder
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is
required along with the vessel master or owner's signature on the completed
programming form.**
Class B AIS transponders have made a remarkable impact on small craft navigation but many potential users or installers are put off by the requirement for yet another VHF antenna.
The AIT3000 "Nucleus" Class B AIS changes that and incorporates not only a full function Class B transponder but also an antenna splitter allowing the main VHF antenna on the boat to be shared with the AIS and VHF.
It's also been designed with the latest interfacing capability including NMEA 0183, NMEA 2000, USB and a WiFi server to allow tablets and iPads to connect - hence the name Nucleus as it becomes the hub for on board navigation. NMEA data from other on board systems can be multiplexed by the Nucleus and combined on the WiFi link.
The Nucleus transponder is the World's first to include ZeroLoss™ technology for the antenna sharing and a wireless interface for iPad connectivity. More and more boat owners are utilising an iPad or tablet as either a primary navigation display or as a touch screen repeater for their existing navigation system. Digital Yacht also offer a free AIS viewing app called iAIS as well as more sophisticated charting apps like NavLink. If you're an Android user, AISView is also compatible. The NMEA interface allows connection to any AIS compatible chart plotter and USB is available for MAC or PC users as well as allowing programming of the unit with your boat details.
Other features include a silence switch option allowing the unit's transmissions to be stopped while continuing to receive AIS transmissions. It also has an output for a FM stereo radio.
Features:
- Combination Class B AIS transponder with ZeroLoss VHF-AIS antenna splitter
- Full connectivity via NMEA0183 Dual In/Out Interfaces with built in multiplexer for instrument data
- NMEA 2000 output
- USB interface for PC and MAC
- Inbuilt WiFi server for tablets & smartphones
- Remote silence switch capability
- Ultra tough, waterproof and compact construction
- FM antenna output
- Supplied with GPS antenna
- Supported range of apps for iOS, Android, PC & MAC
Specifications:
- GPS Included: Yes
- Display Included: No
- Antenna Included: Yes
- AIS Class: B
- Box Dimensions: 4"H x 9"W x 13"L WT: 5.5 lbs
- UPC: ZDIGAIT3000
Owner's Manual (pdf)
