Icom
- All products listed below are in stock and ready to ship.
- Orders are shipped same day when placed before 4PM Est. and are shipped from our east coast warehouse
- Free Shipping on Orders over $200 USD
Icom M605 Fixed Mount 25W VHF w/Color Display, AIS & Rear Mic Connector
$999.99 $1,530.00
M605 Fixed Mount 25W VHF with Color Display, AIS & Rear Mic Connector
Fixed Mount VHF with Flexible System Configurations - Bring on the Color!
The M605 is not just a radio. It's a system that allows the user choices on how to set up the radio with up to three stations. Boaters can now add an exclusive complete display as another station on the vessel along with two COMMANDMICS™. Customers will appreciate the radios large bright display that includes night mode to view easily in the dark. The full featured M605 also gives customers the option of the radio with an integrated AIS receiver. The best just got better!
Configuration Flexibility
The M605 gives the user flexibility in setting up their radio system on their boat. Remotely control up to three controllers using all the M605 functions with the HM-195 series COMMANDMIC™ and/or the RC-M600 Command Head. Either option can be used as an intercom between the radio and the unit, as well.
Use one of the three combinations when setting up your M605: M605 + three COMMANDMICS, M605 + two COMMANDMICS + one Command Head, M605 + two Command Heads + one COMMANDMIC.
Large Color Display
Bring on the color. The M605's large 4.3" color TFT LCD display provides nearly a 180 degree viewing angle. The high resolution characters and function icons along with the directional keypad and soft keys provide an intuitive user interface. The night mode screen provides comfortable operation in the dark. Most used functions are assigned to soft keys (at the bottom of the display) for quick one push function access. The large ten-key pad enables users to smoothly enter channel numbers, MMSI numbers with ID names and much more.
NMEA 2000™ & NMEA 0183 Connectivity
Using NMEA 2000™ connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency, and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000™ data for other equipment.
Integrated AIS Receiver
The M605 with the integrated AIS receiver can show AIS vessel traffic information on the display. The AIS combo screen enables you to monitor the AIS plotter during basic operation. The M605 also allows the user to directly call a selected AIS target from the AIS screen using an individual DSC all.
Features:
- Active noise cancelling
- Last call voice recording saves the last two minutes of the last incoming call or start recording manually
- Integrated GNSS receiver
- Class D DSC
- Weather & alert channels
- AquaQuake® draining function
- Instant access to channel 16 and channel 09 call channel
Specifications:
- Output Power: 25W
- Hailer: 30W listen back hailer
- Horn/Foghorn: Built-in
- GPS: GNSS antenna included
- Waterproof Rating: IPX8
Specifications:
- Hailer/Intercom: Hailer
- Power - Output (Watts): 25W
- Waterproof Rating: Waterproof
- Box Dimensions: 7"H x 12"W x 13"L WT: 7.2 lbs
- UPC: 731797026446
Owner's Manual (pdf)
Brochure (pdf)
Icom M605 Fixed Mount 25W VHF w/Color Display & Rear Mic Connector
$799.00 $1,225.00
M605 Fixed Mount 25W VHF with Color Display & Rear Mic Connector
Fixed Mount VHF with Flexible System Configurations - Bring on the Color!
The M605 is not just a radio. It's a system that allows the user choices on how to set up the radio with up to three stations. Boaters can now add an exclusive complete display as another station on the vessel along with two COMMANDMICS™. Customers will appreciate the radios large bright display that includes night mode to view easily in the dark. The full featured M605 also gives customers the option of the radio with an integrated AIS receiver. The best just got better!
Configuration Flexibility
The M605 gives the user flexibility in setting up their radio system on their boat. Remotely control up to three controllers using all the M605 functions with the HM-195 series COMMANDMIC™ and/or the RC-M600 Command Head. Either option can be used as an intercom between the radio and the unit, as well.
Use one of the three combinations when setting up your M605: M605 + three COMMANDMICS, M605 + two COMMANDMICS + one Command Head, M605 + two Command Heads + one COMMANDMIC.
Large Color Display
Bring on the color. The M605's large 4.3" color TFT LCD display provides nearly a 180 degree viewing angle. The high resolution characters and function icons along with the directional keypad and soft keys provide an intuitive user interface. The night mode screen provides comfortable operation in the dark. Most used functions are assigned to soft keys (at the bottom of the display) for quick one push function access. The large ten-key pad enables users to smoothly enter channel numbers, MMSI numbers with ID names and much more.
NMEA 2000™ & NMEA 0183 Connectivity
Using NMEA 2000™ connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency, and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000™ data for other equipment.
Features:
- Active noise cancelling
- Last call voice recording saves the last two minutes of the last incoming call or start recording manually
- Integrated GNSS receiver
- Class D DSC
- Weather & alert channels
- AquaQuake® draining function
- Instant access to channel 16 and channel 09 call channel
Specifications:
- Output Power: 25W
- Hailer: 30W listen back hailer
- Horn/Foghorn: Built-in
- GPS: GNSS antenna included
- Waterproof Rating: IPX8
Specifications:
- Hailer/Intercom: Hailer
- Power - Output (Watts): 25W
- Waterproof Rating: Waterproof
- Box Dimensions: 6"H x 12"W x 12"L WT: 7.3 lbs
- UPC: 731797026453
Owner's Manual (pdf)
Brochure (pdf)
Icom M424G Fixed Mount VHF Marine Transceiver w/Built-In GPS - Super White
$319.99 $475.00
M424G Fixed Mount VHF Marine Transceiver with Built-In GPS - Super White
Active Noise Cancelling Technology & Built-In GPS for Simple Installation
Intuitive User Interface and White Backlit LCD and Keypad
Incorporating Icom's common Marine Family User Interface designed for simple, intuitive operation. A rotary selector and directional keypad provide quick and easy access to the intended functions. The high contrast white backlit LCD and laser-cut keypad match well with modern boat designs.
Active Noise Cancelling
The built-in active noise cancelling provides superb performance. It reduces background noise up to 90% in the received signal and 30% in the transmits signal.
10W Loud Audio, Public Address & Foghorn
The IC-M424G has a built-in 10W amplifier that increases the audio output to an external PA speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, the foghorn can also be emitted from the external PA speaker.
Built-in Class D DSC
The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Built-In GPS Receiver
The built-in GPS receiver shows your current position, date/time and can be used for DSC calls. The GPS data source is selectable from internal and external GPS.
Optional White Backlit COMMANDMIC™ HM-195GB/GW
The optional white backlit COMMANDMIC makes it convenient for using the IC-M424G from a separate cabin or tower. All functions of the IC-M424G can be controlled from the COMMANDMIC and can be used as an intercom with the IC-M424G.
AIS Target Call with MA-500TR
When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to make an individual DSC call without having to manually input an MMSI number.
Features:
- Simple remote control speaker-microphone, HM-205B/SW
- NMEA 0183 connectivity
- MarineCommander™ compatible
- AquaQuake™ draining function
- IPX7 submersible protection (1m depth for 30 minutes)
- Weather channels with alert function
- Dual/tri-watch function
- Priority and normal scan
- Black and super white versions available
Specifications:
- Waterproof Rating: Waterproof
- Power - Output (Watts): 25W, 1W
- DSC Class: D
- Box Dimensions: 9"H x 5"W x 11"L WT: 4.15 lbs
- UPC: 731797021571
Owner's Manual (pdf)
Brochure (pdf)
Icom M424G Fixed Mount VHF Marine Transceiver w/Built-In GPS - Black
$319.99 $475.00
M424G Fixed Mount VHF Marine Transceiver with Built-In GPS - Black
Active Noise Cancelling Technology & Built-In GPS for Simple Installation
Intuitive User Interface and White Backlit LCD and Keypad
Incorporating Icom's common Marine Family User Interface designed for simple, intuitive operation. A rotary selector and directional keypad provide quick and easy access to the intended functions. The high contrast white backlit LCD and laser-cut keypad match well with modern boat designs.
Active Noise Cancelling
The built-in active noise cancelling provides superb performance. It reduces background noise up to 90% in the received signal and 30% in the transmits signal.
10W Loud Audio, Public Address & Foghorn
The IC-M424G has a built-in 10W amplifier that increases the audio output to an external PA speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, the foghorn can also be emitted from the external PA speaker.
Built-in Class D DSC
The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Built-In GPS Receiver
The built-in GPS receiver shows your current position, date/time and can be used for DSC calls. The GPS data source is selectable from internal and external GPS.
Optional White Backlit COMMANDMICT HM-195GB/GW
The optional white backlit COMMANDMIC makes it convenient for using the IC-M424G from a separate cabin or tower. All functions of the IC-M424G can be controlled from the COMMANDMIC and can be used as an intercom with the IC-M424G.
AIS Target Call with MA-500TR
When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to make an individual DSC call without having to manually input an MMSI number.
Features:
- Simple remote control speaker-microphone, HM-205B/SW
- NMEA 0183 connectivity
- MarineCommander™ compatible
- AquaQuake™ draining function
- IPX7 submersible protection (1m depth for 30 minutes)
- Weather channels with alert function
- Dual/tri-watch function
- Priority and normal scan
- Black and super white versions available
Specifications:
- Waterproof Rating: Waterproof
- Power - Output (Watts): 25W, 1W
- DSC Class: D
- Box Dimensions: 9"H x 5"W x 11"L WT: 4.15 lbs
- UPC: 731797021588
Owner's Manual (pdf)
Brochure (pdf)
Icom M324G Fixed Mount VHF Marine Transceiver w/Built-In GPS - Super White
$282.99 $420.00
M324G Fixed Mount VHF Marine Transceiver with Built-In GPS - Super White
A VHF Marine Transceiver Offering Top Performance & Great Value!
Built-in GPS Receiver (IC-M324G only)
The built-in GPS receiver shows your current position and time and can be used for DSC calls. GPS data source is selectable from internal and external GPS (and GPS-OFF setting).
Intuitive User Interface
Icom's common Marine Family User Interface provides simple operation for the boat owner. A rotary selector and directional keypad provide intuitive operation. The high-definition dot-matrix display allows all information to be clearly viewed.
Built-in Class D DSC
The built-in DSC watch function monitors Ch.70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Common NMEA Interface
When receiving DSC information from another vessel, the IC-M324/G can transfer it to a navigational device via NMEA 0183 connectivity.
Compatible with MA-500TR ClassB AIS Transponder
The IC-M324/G can be integrated with the MA-500TR Class B AIS Transponder, which allows you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry. It is very handy if you are waiting to contact vessels on the AIS screen - an essential safety feature in an emergency.
IPX7 Submersible Protection
The IC-M324/G withstands submersion in up to 1.0m depth of water for 30 minutes. It is equivalent to the IPX7 standard.
Favorite Channel Function
This function promotes quick channel selection. Set the "Tag" channel to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels are selected, while untagged channels are skipped.
Features:
- MarineCommander™ compatible
- MA-500TR AIS transponder compatible
- AquaQuake™ water draining function
- Dual/tri-watch function for monitoring Ch.16 and/or call channel
- Black and super white versions available
Specifications:
- Waterproof Rating: Waterproof
- Power - Output (Watts): 25W, 1W
- DSC Class: D
- Box Dimensions: 9"H x 5"W x 11"L WT: 4 lbs
- UPC: 731797021458
Owner's Manual (pdf)
Brochure (pdf)
Icom M324 Fixed Mount VHF Marine Transceiver - Super White
$219.99 $327.00
M324 Fixed Mount VHF Marine Transceiver - Super White
A VHF Marine Transceiver Offering Top Performance & Great Value!
Built-in GPS Receiver (IC-M324G only)
The built-in GPS receiver shows your current position and time and can be used for DSC calls. GPS data source is selectable from internal and external GPS (and GPS-OFF setting).
Intuitive User Interface
Icom's common Marine Family User Interface provides simple operation for the boat owner. A rotary selector and directional keypad provide intuitive operation. The high-definition dot-matrix display allows all information to be clearly viewed.
Built-in Class D DSC
The built-in DSC watch function monitors Ch.70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Common NMEA Interface
When receiving DSC information from another vessel, the IC-M324/G can transfer it to a navigational device via NMEA 0183 connectivity.
Compatible with MA-500TR ClassB AIS Transponder
The IC-M324/G can be integrated with the MA-500TR Class B AIS Transponder, which allows you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry. It is very handy if you are waiting to contact vessels on the AIS screen - an essential safety feature in an emergency.
IPX7 Submersible Protection
The IC-M324/G withstands submersion in up to 1.0m depth of water for 30 minutes. It is equivalent to the IPX7 standard.
Favorite Channel Function
This function promotes quick channel selection. Set the "Tag" channel to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels are selected, while untagged channels are skipped.
Features:
- MarineCommander™ compatible
- MA-500TR AIS transponder compatible
- AquaQuake™ water draining function
- Dual/tri-watch function for monitoring Ch.16 and/or call channel
- Black and super white versions available
Specifications:
- Waterproof Rating: Waterproof
- Power - Output (Watts): 25W, 1W
- DSC Class: D
- Box Dimensions: 5"H x 9"W x 11"L WT: 4 lbs
- UPC: 731797021472
Owner's Manual (pdf)
Brochure (pdf)
Icom M324 Fixed Mount VHF Marine Transceiver - Black
$219.99 $327.00
M324 VHF Fixed Mount Marine Transceiver - Black
A VHF Marine Transceiver Offering Top Performance & Great Value!
Built-in GPS Receiver (IC-M324G only)
The built-in GPS receiver shows your current position and time and can be used for DSC calls. GPS data source is selectable from internal and external GPS (and GPS-OFF setting).
Intuitive User Interface
Icom's common Marine Family User Interface provides simple operation for the boat owner. A rotary selector and directional keypad provide intuitive operation. The high-definition dot-matrix display allows all information to be clearly viewed.
Built-in Class D DSC
The built-in DSC watch function monitors Ch.70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Common NMEA Interface
When receiving DSC information from another vessel, the IC-M324/G can transfer it to a navigational device via NMEA 0183 connectivity.
Compatible with MA-500TR ClassB AIS Transponder
The IC-M324/G can be integrated with the MA-500TR Class B AIS Transponder, which allows you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry. It is very handy if you are waiting to contact vessels on the AIS screen - an essential safety feature in an emergency.
IPX7 Submersible Protection
The IC-M324/G withstands submersion in up to 1.0m depth of water for 30 minutes. It is equivalent to the IPX7 standard.
Favorite Channel Function
This function promotes quick channel selection. Set the "Tag" channel to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels are selected, while untagged channels are skipped.
Features:
- MarineCommander™ compatible
- MA-500TR AIS transponder compatible
- AquaQuake™ water draining function
- Dual/tri-watch function for monitoring Ch.16 and/or call channel
- Black and super white versions available
Specifications:
- Waterproof Rating: Waterproof
- Power - Output (Watts): 25W, 1W
- DSC Class: D
- Box Dimensions: 5"H x 9"W x 11"L WT: 4 lbs
- UPC: 731797021489
Owner's Manual (pdf)
Brochure (pdf)
Icom M506 VHF Fixed Mount w/NMEA 0183 - Black
$405.99 $610.00
$100 Mail-In Rebate w/Qualifying Purchase UNTIL 06/30/2017 VIEWM506 VHF Fixed Mount with NMEA 0183 - Black
One Platform - Five Real World Solutions. A Fit For Every Need. Simply the Best.
The basic model comes with NMEA 0183 installed and includes the same built-in features as the other models. Other built-in M506 features include:
- 2 minute last call voice recording
- Active noice cancelling
- 25W two-way hailer and foghorn
- Large dot-matrix display
- Intuitive user interface
- Built-in Class D DSC
- IPX8 (advance waterproof rating)
- COMMANDMICIV™ compatible
NMEA 0183 Connectivity
The NMEA 0183 input/output can be used for external GPS/NAV interface.
Last Call Voice Recording
The last call voice recording function automatically saves the last two minutes of the last incoming call. You can also start recording manually.
Active Noise Cancelling
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call.
25W Two-Way Hailer
When connected to an external hailer horn, you can talk to people on the deck or shore from the radio's microphone and can hear people's reply via the hailer horn. Foghorn and RX speaker functions are also available.
Optional COMMANDMIC™ HM-195B/SW
The optional COMMANDMIC, HM-195B/SW provides 2nd station capability for using the IC-M506 from a separate cabin or tower. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC and can be used as an intercom between the IC-M506 and the COMMANDMIC.
Large LCD & Intuitive User Interface
The IC-M506 is equipped with 132x96 pixels dot-matrix display which is larger than the IC-M504 (132x64 pixels). Reading GPS, AIS, DSC and radio menus are easier than ever. The bottom line of the display shows the software key functions and the functions can be toggled with the left and right buttons.
Features:
- 80dB (typical) IMD and channel selectivity
- MA-500TR AIS transponder and Marine-Commander™ compatible
- IPX8 submersible plus protection (1m depth for 60 minutes)
- Front panel microphone version
- Optional voice scrambler
Specifications:
- Channels - Available: All US, Canadian, International
- DSC Class: D
- Hailer/Intercom: Hailer
- Power - Output (Watts): 25W/1W
- Remote Mic Capable: Yes
- Scrambler Capable: Yes
- Waterproof Rating: Submersible
- Weather Alert: Yes
- Box Dimensions: 7"H x 10"W x 13"L WT: 5.1 lbs
- UPC: 731797017680
Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)
Icom MA-500TR AIS Transponder w/MX-G5000 GPS Receiver Class B
$899.00 $1,500.00
The MA-500TR is a class B AIS transponder that offers modern navigation safety while matching the clean look of Icom's award-winning VHF and SSB radios. Give your helm a handsome, harmonious look for fraction of the price. The MA-500TR automatically shares your vessel information with other AIS transponders. If you want to contact another vessel, you no longer need to locate and punch in its 9-digit MMSI number - the MA-500TR does it automatically. AIS information is displayed on the MA-500TR's own modest (yet clear and bold) screen or, for those who want a larger screen, in an NMEA-standard data stream for use by third-party chartplotters or other onboard nav gear. When you want the best, get the best. Get Icom. Simply the best.
The MA-500TR is a Class B AIS transponder for Non-SOLAS vessels such as pleasure craft, work-boat and small vessels. Your vessels information will automatically be transmitted at fixed intervals or under base station control. The MA-500TR receives dual AIS channels (Ch. 87B and Ch. 88B) simultaneously and receives both Class A and Class B AIS information. Transmitted information by MA-500TR is:
Simple operation
The Plotter display looks like a marine radar display. North-up, course-up and range zoom from 0.125 NM to 24 NM are supported. The Target list display shows all detected AIS equipped vessels and targets. The Danger list display shows a list of vessels that are within 6 NM CPA and 60 minutes TCPA from your vessel. The Danger list can be sorted by CPA or TCPA order. In addition to these display types, the Detail screen shows various information about the selected AIS target.
CPA and TCPA for collision-risk management
When a vessel comes into the CPA and TCPA range, the vessel icon blinks on the Plotter dispaly and emits a beep sound. When connected to external audio equipment installed on the deck tower, the collision alarm function will alert you even when you are away from the AIS transponder.
Individual DSC call
When connected to a compatible Icom VHF radio. It's easy to make an individual DSC call. Select a vessel using the MA-500TR's cusor keys and then push the "DSC" button on the MA-500TR. It is not required to input an MMSI number manually.
100 Waypoints memory
Up to 100 waypoints can be stored on the waypoint list. The "MOB" button allows you to set a waypoint on your current position instantly.
Safety-related message
When the MA-500TR receives a safetey-related message from a Class A AIS transponder, the message icon appears on the Plotter display. Up to 20 received DSC messages are automatically stored in the log memory.
3-line NMEA input/output
The MA-500TR has 15-pin D-SUB connector providing 3-lines of NMEA input/output on the rear panel. The supplied NMEA connector cable simplifies the installation and connection to the VHF radio and other navigation equipment.
GPS receiver comes with MA-500TR
The MX-5000 GPS receiver is a 12 channel parallel GPS receiver with SBAS function.
- Other Features
- Full dot-matrix display with adjustable backlight and contrast
- Works with Icom's M504/M604 VHF radios
- IPX7 waterproof protection (up to 1m depth of water for 30 minutes, except connections)
- Self diagnosis function
- Flush mount installation with optional MB-75
- Slow warm function
Specifications:
- SOLAS/Non-SOLAS: Non-Solas
- GPS Included: Yes
- Display Included: Yes
- Antenna Included: Yes
- AIS Class: B
- Box Dimensions: 9"H x 9"W x 20"L WT: 7 lbs
- UPC: 731797007957
Owner's Manual (pdf)
Brochure (pdf)
Icom M25 Floating VHF - 5W - Pearl White
$142.99 $245.00
M25 Floating VHF - Pearl White
Float'n Flash™
The IC-M25 floats and lets you know where it is with the flashing red LED light and LCD/key backlight.
11 Hours long battery Life
The built-in 1500mAh lithium-ion battery allows 11 hours (approx.) of long operation.*
*Typical operation with Tx (Hi: Rx: standby = 5:5:90)
USB charging (Micro-B USB type)
- A standard USB connector (Micro-B type) is used for charging the IC-M25. Cigarette lighter cables or mobile batteries for charging smartphones or other devices can be used with the IC-M25*.
*The IC-M25 accepts 5V/1A (Max.) input. Use of third-party products is not guaranteed.
AquaQuake™ Draining Function
When water is in the speaker grill, Icom's unique AquaQuakeT emits a buzzing sound and sheds water from the speaker. This function assures clear sharp sound at all times.
Three Color Choices
Available colors are Metallic Gray, Pearl White and Marine Blue.
Slim Body & Lightweight
The 7.76-ounce (220g) lightweight and 1.2 inch (30.5mm) slim body is the new benchmark for floating marine transceivers.
Large LCD, Simpel User Interface
The IC-M25's LCD is 30% larger than the IC-M24's and clearly shows large channel number and status icons. The buttons on the front panel are well laid out and provide simple and straightforward operation.
550mW Audio Output
The IC-M25 provides a powerful 550mW audio output and received voice can be heard loud and clear. By holding the VOL/SQL button with (up) button, the volume is instantly turned up to the maximum level.
Optional Speaker Microphone, HM-213
The optional waterproof speaker microphone, HM-213, provides commercial grade convenience while mounting the radio around the waist.
Features:- IPX7 waterproof construction (1m depth of water for 30 minutes)
- 4-step battery life indicator
- Weather channel with weather alert (USA version only)
- Dual/Tri-watch functions
- Instant access to Channel 16 or programmable call channel
- Favorite channel function
- Monitor function opens noise squelch
- Auto scan function
- LCD auto backlighting
Supplied Accessories:- USB Charger, BC-217SA
- Belt Clip, MB-133
- Antenna, FA-SC59V
- Hand Strap
Specifications:
- Power - Output (Watts): 5W
- Box Dimensions: 3"H x 8"W x 9"L WT: 1.2 lbs
- UPC: 731797024527
- IPX7 waterproof construction (1m depth of water for 30 minutes)
Icom M88 Nonincendive Handheld VHF Radio
$340.99 $507.00
M88 Nonincendive Handheld VHF Radio
What makes Icom's M88 so special? Functionality. Features. Unparalleled battery life and power. Submersible construction. Military ruggedness. Frequency control. Choice of optional features. And a surprisingly small size that fits incredibly well in the hand. Compare for yourself; the Icom IC-M88 is a better fit not just for one-handed operation, but all-around.
What is nonincendive equipment? Section 500.7(F) of the National Electrical Code explains that it is a protection technique for equipment used in Class I, Division 2, hazardous (classified) locations.
Intrinsically Safe vs. Nonincendive
- A radio termed "intrinsically safe" is designed and certified to
eliminate or encapsulate any components that produce sparks or which
could generate enough heat to cause an ignition in areas with flammable
gasses, dusts or fuels. Most of these radios are approved to sell in
Division 1 & 2
- Nonincendive radios are incapable of generating thermal or
electrical energy sufficient to ignite a volatile atmosphere under normal
operating conditions-although sufficient energy for ignition could be
generated under fault conditions. These radios are only approved to sell
in Division 2
- Division 1 = hazardous locations such as inside a tank or container
requires "intrinsically safe" equipment
- Division 2 = hazardous locations such as outside of the shielded
tank or container requires "nonincendive" equipment
Specifications:
- Battery Type: Lithium Ion
- Capacity - Battery (mAH): 1700
- Channels - Available: All US, Canadian, International
- Channels - Other: LMR
- Power - Output (Watts): 5W, 3W, 1W
- Speaker Mic: Yes
- Waterproof Rating: Submersible
- Weather Alert: Yes
- Box Dimensions: 5"H x 7"W x 9"L WT: 2 lbs
- UPC: 731797025531
Icom M73 PLUS Handheld VHF - 6W - IPX8 Submersible - Active Noise Canceling, Built-In Voice Recorder
$261.99 $390.00
M73 PLUS Handheld VHF - 6W - IPX8 Submersible - Active Noise Canceling, Built-In Voice Recorder
The M73 PLUS if perfect for the commercial marine market and radio users familiar with Icom's celebrated M73 VHF handheld. The M73 PLUS features 6 Watts of high transmit power and waterproof IPX8 Submersible construction. The M73 PLUS also promotes a popular hourglass body shape and comfortable side grips for intuitive one-handed operation.
The M73 PLUS features loud 700mW audio output and approximately 18 hours of
operating time. Utilizing a new interface design with large directional buttons, users gain fast access to menu items and radio functions. The compact radios are rigorously tested for durability and meet MIL-STD 810 specifications.
Additional audio enhancements are available in the M73 PLUS version. Background noise is reduced up to 90% and lower voice frequency is discerned through the handheld's radio speaker. Features such as "Last Call" voice recording and playback, active noise cancelling and "Bass Boost" improve audio performance on incoming and outgoing calls.
The M73 PLUS offers reliable audio, rugged construction and easy operation-perfect for professional mariners and current M72 radio users. It is compatible with most M72 handheld accessories and includes other accessories as well.
Features:
- "Last Call" features - Voice recording and playback functions
- "Bass Boost" - Emphasizes lower frequency for better audio
- Active noise canceling - Reduces background noise up to 90%
- User interface design with larger buttons
- Louder 700mW audio output
- Built Icom tough and meets MIL-STD 810 specifications
- Longer battery life allows approximately 18 hours of operating life
- Impressive 6W of high RF performance
- Compact, slim and ergonomic design for easy one-handed operation
- IPX8 Submersible (submersion for 30 minutes in 1.5-meter of water)
- Optional Speaker Mic
- AquaQuake™ water draining function
- Dual/Tri-Watch function for monitoring Channel 16 and/or call channel
- 4 level battery indicator
- Favorite channel and tag scan functions
- Auto power scan function
Specifications:
- Battery Type: Lithium Ion
- Capacity - Battery (mAH): 2000 mAh
- IPX Rating: IPX8
- Power - Output (Watts): 6 Watts
- Waterproof Rating: Submersible
- Weather Alert: Yes
- Box Dimensions: 4"H x 8"W x 9"L WT: 2 lbs
- UPC: 731797024435
Icom M25 Floating VHF - Metallic Gray - 5W
$142.99 $245.00
M25 Floating VHF - Metallic Gray - 5W
Float'n Flash™
The built-in 1500mAh lithium-ion battery allows 11 hours (approx.) of long operation.*
*Typical operation with Tx (Hi: Rx: standby = 5:5:90)
USB Charging (Micro-B USB Type)
A standard USB connector (Micro-B type) is used for charging the IC-M25. Cigarette lighter cables or mobile batteries for charging smartphones or other devices can be used with the IC-M25*.
*The IC-M25 accepts 5V/1A (Max.) input. Use of third-party products is not guaranteed.
AquaQuake™ Draining Function
When water is in the speaker grill, Icom's unique AquaQuakeT emits a buzzing sound and sheds water from the speaker. This function assures clear sharp sound at all times.
Three Color Choices
Available colors are Metallic Gray, Pearl White and Marine Blue.
Slim Body & Lightweight
The 7.76-ounce (220g) lightweight and 1.2 inch (30.5mm) slim body is the new benchmark for floating marine transceivers.
Large LCD, Simple User Interface
The IC-M25's LCD is 30% larger than the IC-M24's and clearly shows large channel number and status icons. The buttons on the front panel are well laid out and provide simple and straightforward operation.
550mW Audio Output
The IC-M25 provides a powerful 550mW audio output and received voice can be heard loud and clear. By holding the VOL/SQL button with (up) button, the volume is instantly turned up to the maximum level.
Optional Speaker Microphone, HM-213
The optional waterproof speaker microphone, HM-213, provides commercial grade convenience while mounting the radio around the waist.
Features:
- IPX7 waterproof construction (1m depth of water for 30 minutes)
- 4-step battery life indicator
- Weather channel with weather alert (USA version only)
- Dual/Tri-watch functions
- Instant access to Channel 16 or programmable call channel
- Favorite channel function
- Monitor function opens noise squelch
- Auto scan function
- LCD auto backlighting
Supplied Accessories:
- USB charger, BC-217SA
- Belt Clip, MB-133
- Antenna, FA-SC59V
- Hand Strap
Specifications:
- Battery Type: Lithium Ion
- Capacity - Battery (mAH): 11 Hours
- Channels - Available: All US, Canadian, International
- IPX Rating: IPX7
- Box Dimensions: 3"H x 8"W x 9"L WT: 1.3 lbs
- UPC: 731797024510
Brochure (pdf)
Icom M36 Floating Handheld VHF Radio - 6W
$191.99 $288.00
$30 Mail-In Rebate w/Qualifying Purchase UNTIL 06/30/2017 VIEWFloating Handheld VHF Radio - 6W
Clear voice + voice boost
In marine environments there are many sources of noise that can affect the quality of your communications, such as engine noise, breaking surf and more. The IC-M36 automatically adjusts the outgoing voice and the incoming audio to compensate for the ambient noise level: whether you're in a loud environment or in a quiet area, the IC-M36 ensures your radio conversation is sent and received as clearly as possible.
And YES, It FLOATS
Continuing the legacy of the IC-M34, the fully submersible IC-M36 floats back up to the surface if dropped overboard, even if the optional speaker microphone, HM-165, is attached.
AquaQuake draining function
The vibrating "buzz" sound clears water away from the speaker grill.
LOUD button
When you need an instant "boost" in the volume, a simple push of the "LOUD" button gives you full volume immediately. In addition, holding the "LOUD" button mutes the audio output.
Noise cancelling microphone
The sub-microphone on the rear panel inverts phase and cancels out ambient noise from the main microphone. As a result, the IC-M36 reduces the affect of background noise (particularly trebly noise) from the transmitted signal and makes it easier to catch voice communication.
Automatic volume adjustment
When in an engine room or high noise environment, the sub-microphone detects the ambient noise and the IC-M36 automatically increases the volume output to suit the surrounding environment.
Low power consumption
Although the IC-M36 delivers a high 6W RF output and 700mW audio output, its current saving circuit offers a practical 8 hours1 of operating time with the supplied 980mAh Lithium-Ion battery pack.1Typical operation with Tx (Hi): Rx: standby=5:5:90
Large buttons and slim dimensions
Thanks to the large, easy-to-operate buttons, the IC-M36 provides intuitive operation. A pinched-waist slender body makes it easy to hold and carry the radio, and is surprisingly compact for a floating radio.
Other features
- Waterproof construction equivalent to IPX7 (1m depth for 30 minutes)
- Dual/Tri-watch functions
- 4-step battery life indicator
- Weather channel with weather alert
- Auto scan function
- Instant access to Ch 16 or Ch 9
Comes with
- Battery pack (BP252)
- Battery charger (BC173)
- AC adapter (BC147)
- Belt clip (MB109)
- Antenna (FAS58V)
- Hand strap
- Owner's manual
- Warranty: 3 years
Specifications:
- Battery Type: Lithium Ion
- Capacity - Battery (mAH): 980mAh
- Power - Output (Watts): 6W
- Speaker Mic: Yes
- Waterproof Rating: Submersible
- Weather Alert: Yes
- Box Dimensions: 3"H x 8"W x 9"L WT: 1.6 lbs
- UPC: 731797024466
Icom M73 Handheld VHF - 6 Watts - IPX8 Submersible - Black
$211.99 $315.00
M73 Handheld VHF
The M73 is perfect for the commercial marine market and radio users familiar with Icom's celebrated M72 VHF handheld. The M73 features 6 Watts of high transmit power and waterproof IPX8 Submersible construction. The M73 also promotes the popular hourglass body shape and comfortable side grips for intuitive one-handed operation.
The M73 also features loud 700mW audio output and approximately 18 hours of
operating time. Utilizing an interface design with large directional buttons, users gain fast access to menu items and radio functions. The compact radios are rigorously tested for durability and meet MIL-STD 810 specifications.
The M73 offers reliable audio, rugged construction and easy operation -- perfect for professional mariners and current M72 radio users. It is compatible with most M72 handheld accessories and will include other accessories as well.
Features:
- Slim, hourglass body and wide viewing angle LCD
- IX8 Submersible PLUS™
- User interface design with larger buttons
- Louder 700mW audio output
- Built Icom tough and meets MIL-STD 810 specifications
- Longer battery life allows approximately 18 hours of use
- Impressive 6 Watt of high RF performance
- Compact, slim and ergonimic design for easy one-handed operation
- IPX8 Submersible (submersion for 30 minutes in 1.5-meter of water)
- Optional Speaker Mic
- AquaQuake™ water draining function
- Dual/Tri-Watch function for monitoring Channel 16 and/or call channel
- 4 level battery indicator
- Favorite channel and tag scan functions
- Auto power save function
Comes with:
- Cigarette lighter cable (CP25H)
- AC adapter (BC123SA)
- Rapid charger (BC210)
- Battery pack (BP245N)
- Belt clip (MB103)
- Antenna (FAS64V)
- Hand strap
- Owner's manual
- Warranty: 3 years
Specifications:
- Battery Type: Lithium Ion
- Capacity - Battery (mAH): 2000 mAh
- IPX Rating: IPX8
- Power - Output (Watts): 6W
- Speaker Mic: Yes
- Waterproof Rating: Submersible
- Weather Alert: Yes
- Box Dimensions: 4"H x 7"W x 9"L WT: 2.1 lbs
- UPC: 731797024428
Icom COMMANDMICIV™ w/White BlackLit LCD - Super White
$192.99 $280.00
COMMANDMICIV™ w/White BlackLit LCD - Super White
HM195GW Remote Control Microphone with White Back Light
The new optional COMMANDMIC, HM-195GB/GW, makes it convenient for using the IC-M423G from a separate cabin or tower. The COMMANDMIC can be positioned up to 18.3m (60ft) away from the IC-M423G. All functions of the IC-M423G, including power switch, distress call, DSC, and PA functions can be controlled from the COMMANDMIC. The COMMANDMIC can also be used as an intercom with the IC-M423G.
The COMMANDMIC provides the same user interface as the IC-M423G. The intuitive menu system provides easy and intuitive operation.
Other features:
- IPX7 Submersible Protection (1.0m depth for 30 minutes)
- Class D DSC full control capability. DSC "Distress" button on the back of the unit
- Large 45mm (d) speaker for superior audio
- Black and super white versions available
Icom COMMANDMICIV™ w/White Blacklit LCD - Black
$192.99 $280.00
COMMANDMICIV™ w/White Blacklit LCD - Black
HM195GB Remote Control Microphone with White Back Light
The optional COMMANDMIC, HM-195GB/GW, makes it convenient for using the IC-M423G from a separate cabin or tower. The COMMANDMIC can be positioned up to 18.3m (60ft) away from the IC-M423G. All functions of the IC-M423G, including power switch, distress call, DSC, and PA functions can be controlled from the COMMANDMIC. The COMMANDMIC can also be used as an intercom with the IC-M423G.
The COMMANDMIC provides the same user interface as the IC-M423G. The intuitive menu system provides easy and intuitive operation.
Features:
- IPX7 Submersible Protection (1.0m depth for 30 minutes)
- Class D DSC full control capability. DSC "Distress" button on the back of the unit
- Large 45mm (d) speaker for superior audio
- Black and super white versions available
Icom Standard Hand Mic f/M424 - Super White
$82.99 $85.00
Standard Hand Mic
Super White
For use with M424
Specifications:
- Box Dimensions: 2"H x 3"W x 9"L WT: 0.7 lbs
- UPC: 731797013378
Icom Mounting Bracket f/M412 & M422 - Super White
$27.00
Mounting Bracket
Features:
- Color: Super White
- Specifically for use with Icom's M412 and M422
Specifications:
- Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs
Icom Standard Antenna f/GM1600
$11.99 $12.00
Standard Antenna
Standard Replacement Antenna f/GM1600
Specifications:
- Box Dimensions: 1"H x 1"W x 7"L WT: 0.1 lbs
- UPC: 731797812957
Icom Desktop Trickle Charger f/GM1600 & M90
$17.99 $18.00
Desktop Trickle Charger
For use with GM1600 & M90
Specifications:
- Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs
- UPC: 731797812797
Icom Charger Adapter f/GM1600
$17.99 $18.00
Charger Adapter Cup
GM1600 Adapter for BC119N, BC121N & M90
Specifications:
- Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs
- UPC: 731797812827
Icom Standard Antenna f/M92D
$17.99 $18.00
Standard Antenna
Soft, flexible replacement antenna f/M92D
Specifications:
- Box Dimensions: 1"H x 1"W x 6"L WT: 0.1 lbs
- UPC: 731797013170
Icom PC To Radio Programming Cloning Cable w/USB Connector
$158.99 $168.00
PC To Radio Programming Cloning Cable w/USB Connector
For radios with 9-Pin Connector
Specifications:
- Box Dimensions: 1"H x 7"W x 7"L WT: 0.7 lbs
- UPC: 731797000651
Icom PC To Radio Programming Cloning Cable w/RS-232S Connector
$158.99 $168.00
PC To Radio Programming Cloning Cable w/RS-232S Connector
For radios with 9-Pin Connector
Specifications:
- Box Dimensions: 1"H x 7"W x 7"L WT: 0.5 lbs
- UPC: 731797808868
Icom VOX/PTT Case w/9-Pin Connector
$64.99 $68.00
VOX/PTT Case w/9-Pin Connector
Must use with HS94, HS95 & HS97
Specifications:
- Box Dimensions: 3"H x 5"W x 8"L WT: 0.2 lbs
- UPC: 4909723809951
Icom Nylon Carrying Case w/Belt Clip f/M88, F50 & F60
$24.99 $26.00
Nylon Carrying Case w/Belt Clip
For use with M88, F50 & F60
Specifications:
- Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs
Icom Cloning Cable Adapter f/M72, M73 & M92D
$61.99 $65.00
Cloning Cable Adapter
For use with M72, M73 & M92D
Specifications:
- Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs
Icom 220V AC Adapter f/Rapid Chargers, BC191, BC193 & BC160
$20.99 $27.00
220V AC Adapter f/Rapid Chargers
For use with BC191, BC193 & BC160 rapid chargers
Specifications:
- Box Dimensions: 2"H x 3"W x 4"L WT: 0.3 lbs
- UPC: 731797014191
Icom Adapter Cup f/BC197 Gang Charger
$25.99 $27.00
Adapter Cup
Icom's adapter cup is specifically for Icom's BC197 gang charger which is used with Icom's M73.
Specifications:
- Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs
- UPC: 731797015976
Icom Alligator Belt Clip
$11.99 $12.50
Alligator Clip
Belt Clip used with belt hanger
Specifications:
- Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs
- UPC: 731797812698
Icom Cloning Cable Adapter f/M36
$44.99 $47.00
Cloning Cable Adapter
For use with M36
Specifications:
- Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs
- UPC: 731797000996
Icom Cloning Cable Adapter f/M24
$33.99 $35.00
Cloning Cable Adapter
Cloning cable adapter f/M24
Specifications:
- Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs
- UPC: 731797010186
Icom Cigarette Lighter Cable
$26.99 $28.00
Cigarette Lighter Cable
Cable that charges the charger in a vehicle
Specifications:
- Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs
- UPC: 731797009913
Icom 110V Wall Charger f/M24
$14.99 $15.00
110V Wall Charger
For use with M24
Specifications:
- Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs
- UPC: 731797010209
Icom Charger Adapter Cup f/M24
$21.99 $23.00
Charger Adapter Cup
Adapter cup for charging M24
Specifications:
- Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs
- UPC: 731797010193
Icom DC Power Cable f/Single Unit Rapid Chargers
$25.99 $26.00
DC Power Cable
For single unit rapid chargers
Compatible with:
M24, M36, M72, M73, M88, M92D, GM1600
Specifications:
- Box Dimensions: 1"H x 1"W x 5"L WT: 0.1 lbs
- UPC: 4909723804116
Icom Alligator Type Belt Clip f/M24
$11.99 $12.00
Belt Clip
Alligator type belt clip f/M24
Specifications:
- Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs
- UPC: 731797006943
Icom Li-Ion 1500MAH Battery Pack f/M24
$56.99 $60.00
Li-Ion Battery Pack
3.7V, 1500/1590 mAh (min./typ.)
Specifications:
- Battery Type: Lithium Ion
- Box Dimensions: 1"H x 2"W x 2"L WT: 0.1 lbs
- UPC: 731797009753
Icom HM-202 Compact Speaker Mic - Waterproof
$118.99 $125.00
HM-202 Compact Speaker Mic - Waterproof
Features:
- Equipped with an 8-position rotatable clip
- HM-202 speaker microphone meets IP67 requirements
- Compatible with M72 and M73
- Dust-tight and waterproof protection
Icom M506 VHF Fixed Mount w/Rear Mic, AIS & NMEA 0183/2000® - Black
$657.99 $990.00
$100 Mail-In Rebate w/Qualifying Purchase UNTIL 06/30/2017 VIEWM506 VHF Fixed Mount with Rear Mic, AIS & NMEA 0183/2000® - Black
One Platform - Five Real World Solutions. A Fit For Every Need. Simply
the Best.
The Rear Mic model includes an integrated AIS receiver and NMEA
0183/2000®. Other built-in M506 features include:
- 2 minute last call voice recording
- Active noice cancelling
- 25W two-way hailer and foghorn
- Large dot-matrix display
- Intuitive user interface
- Built-in Class D DSC
- IPX8 (advance waterproof rating)
- COMMANDMICIV™ compatible
Integrated AIS Receiver
With an integrated AIS receiver, the IC-M506 can show AIS vessel traffic
information on the display. The AIS target call function allows you to
easily set up an individual DSC call. The Plotter, Target list and Danger
list can be toggled on the display.
NMEA 2000® and NMEA 0183 Connectivity
With the plug-and-play functionality of NMEA 2000, the IC-M506 can easily connect to a NMEA 2000 network and interconnect with other equipment. Also the NMEA 0183 input/output can be used for external GPS/NAV interface.
Last Call Voice Recording
The last call voice recording function automatically saves the last two minutes of the last incoming call. You can also start recording manually.
Active Noise Cancelling
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call.
25W Two-Way Hailer
When connected to an external hailer horn, you can talk to people on the deck or shore from the radio's microphone and can hear people's reply via the hailer horn. Foghorn and RX speaker functions are also available.
Optional COMMANDMIC™ HM-195B/SW
The optional COMMANDMIC, HM-195B/SW provides 2nd station capability for using the IC-M506 from a separate cabin or tower. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC and can be used as an intercom between the IC-M506 and the COMMANDMIC.
Large LCD & Intuitive User Interface
The IC-M506 is equipped with 132x96 pixels dot-matrix display which is larger than the IC-M504 (132x64 pixels). Reading GPS, AIS, DSC and radio menus are easier than ever. The bottom line of the display shows the software key functions and the functions can be toggled with the left and right buttons.
Features:
- 80dB (typical) IMD and channel selectivity
- MA-500TR AIS transponder and Marine-Commander™ compatible
- IPX8 submersible plus protection (1m depth for 60 minutes)
- Rear panel microphone version
- Optional voice scrambler
Specifications:
- Channels - Available: All US, Canadian, International
- DSC Class: D
- Hailer/Intercom: Hailer
- Power - Output (Watts): 25W/1W
- Remote Mic Capable: Yes
- Scrambler Capable: Yes
- Waterproof Rating: Submersible
- Weather Alert: Yes
- Box Dimensions: 7"H x 10"W x 13"L WT: 5.7 lbs
- UPC: 731797017642
Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)
Icom M400BB Black Box VHF Marine Tranceiver w/Black Command Mic
$396.99 $590.00
$50 Mail-In Rebate w/Qualifying Purchase UNTIL 06/30/2017 VIEWM400BB VHF Marine Black Box
Black Box Transceiver When Space Is At A Premium
Icom's M400BB is a VHF fixed mount with Class D DSC. The M400BB is a spacesaving unit, ideal for owners of compact boats and shipbuilders looking for a black box solution. The M400BB comprises only a black box main body and a supplied COMMANDMIC HM195 remote control microphone accessory. The two-piece radio set can easily be installed behind a wall or console-leaving a small or hidden footprint-and completely controlled from a remote position.
Although compact in size, the M400BB possesses the same robust functionality found in Icom's M424 VHF fixed mount. Features include Class D DSC and the COMMANDMIC intuitive soft-key interface design. Active noise cancelling, a 10W loudspeaker and public address (PA) are built in for optimal audio performance. The M400MB is compatible with Icom's MA-500TR AIS transponder for additional safety at sea.
Space-Saving, 2-Piece Configuration
The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.
Intuitive User Interface
The menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.
Active Noise Cancelling
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.
10W Loud Audio, Public Addres & Foghorn
Built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.
Built-in Class D DSC
The built-in DSC watch function monitors Ch.70 (DSC channel) actively, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
Common NMEA Interface
When connected to an external GPS receiver, current position and time are shown on the Commandmic display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.
AIS Target Call With MA-500TR
When connected to the optional MA-500TR Class B AIS transponder, the AIS
target call function allows you to set up an individual DSC call from the MA-500TR.
Additional Features:
- MarineCommander™ compatible
- AquaQuake™ water draining function (HM-195B/SW)
- IPX7 waterproof protection both for IC-M400BB and HM-195B/SW
(1m depth for 30 minutes)
- Dual/tri-watch function for monitoring Ch.16 and/or call channel
- Priority and normal scan
- Flexible installation
- Small foot print with 2-piece station
- Perfect for compact boats
Comes with
- Commandmic (HM195B)
- DC Power cable
- Owner's manual
- Warranty: 3 years
Specifications:
- Channels - Available: All US, Canadian, International
- DSC Class: D
- Power - Output (Watts): 25W, 1W
- Remote Mic Capable: Yes
- Waterproof Rating: Waterproof
- Box Dimensions: 8"H x 8"W x 10"L WT: 5 lbs
- UPC: 731797015433
Quick Guide (pdf)
Icom MB-132 SS Flush Mount Kit f/IC-M424, IC-M506
$32.99 $37.00
Flush Mount Kit
Icom MB-132 Stainless Steel Flush Mount Kit for the Icom M424, M506
Icom CommandMic IV White
$199.99 $280.00
COMMANDMIC IV (HM-195)
4th Generation Command & Control
A new look for total control of all communications and DSC functions. Sharing the same soft-key user interface as the IC-M92D handheld and IC-M424 fixed mount VHF's makes for easy operation across the family of products.
Features
Quick Guide (pdf)
Icom 110V AC Power Supply f/BC121N
$113.99 $120.00
AC Power Supply
Features:
- Specifically for BC121N
- 110 Volts
- AC Power Supply
Icom HM-167 Speaker Mic - Waterproof
$91.99 $97.00
Waterproof Speaker Mic for Icom's M72, M73, & GM1600
Based on the HM-165, the HM-167 has been designed for marine users who require a lightweight IPX7 waterproof speaker microphone. For use with the Icom M72 handheld VHF.
Icom 20' Extension Cable f/HM-162
$49.00
20' Extention Cable for Icom's HM-162
Use this extension cable with the HM-162B/SW microphones and your Icom marine radio. Extend microphone control of your radio.
Specifications:
- Box Dimensions: 1"H x 7"W x 7"L WT: 0.8 lbs
- UPC: 731797000088
Icom COMMANDMICIII - Black
$199.00 $300.00
COMMANDMICIII - Black
Enjoy complete control of your IC-M504 and IC-M602 fixed-mount marine VHF radio from a remote location with the Icom HM-162B COMMANDMICIII. The COMMANDMICIII which fits comfortably in the palm of your hand--in effect serves as a second station for your vessel. Need to call a fellow boater or make a distress call but don't have time to trudge all the way to the main radio? Pick up a COMMANDMICIII, an ideal communications accessory for the deck, fly bridge, or main cabin (the mic must be located within 70 feet of the main radio).
The COMMANDMICIII sports such features as: a sizable built-in LCD, an extra-large 1.7-inch speaker, and a multifunction jog dial that offers quick and easy access to all the controls on your radio, including channel selection, volume, squelch, menu settings, DSC calls, and foghorn functions. You can even use the COMMANDMICIII to talk with the main unit as an intercom, making onboard communication easier than ever.
Quick Guide (pdf)
