OceanLED
- All products listed below are in stock and ready to ship.
- Orders are shipped same day when placed before 4PM Est. and are shipped from our east coast warehouse
- Free Shipping on Orders over $200 USD
Ocean LED X-Series X16 - Midnight Blue LEDs
$719.10 $799.00
X-Series X16 - Midnight Blue LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
- Boat size: up to 65' (20M)
- Transom / Hull spacing: 2-4' (0.5-1.2M)
- Transom quantity: 2-6
- Hull quantity: 4-8" (10-20cm)
- Maximum hull thickness: N/A
- Installation depth (to top of fixture): 300mm below water line
- In water fitting: No
Technical
- Light output equivalent to: 150 Metal Halide
- Fixture Lumens* (total light output from a finished fixture): 4,500
- Lumens: 5,800
- Beam angle: 60° circular
- Typical LED life expectancy: 40,000 hours
- Minimum-Maximum operating voltage DC: 9 - 32 V DC
- Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
- Approx. light penetration (avg. water quality): 40' (12M)
- Approx. Light penetration (perfect water quality): 100' (30M)
- Driver type: Internal
- Driver size (L x W x H): N/A
- Colour options: Ultra White - Midnight Blue or Colours
- Correlated Color Temp: 6500 K - 450 nm
- IP Rating: IP68
- Fish strobe: YES
- Anti fouling properties: Tritonium coated lens
- LED Manufacturer: CREE
Physical
- Size: 9.84" (250mm) x 4.29" (109mm)
- Depth: 0.86" (22mm)
- Total weight including electrical driver: 0.50kg
- Extension cable length (standard-hard wired to light): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: Chemically Resistant Optical Polymer
- Lens material: Pilkington Optiwhite
- Body construction: Machined (First Release)
- Bezel material: Plastic
- Bezel thickness: N/A
- Bezel options: Stainless Steel Bezel Optional
- Bezel colour: White
- Drag factor: N/A
- Optics: Collimator
- No of LEDs: 16
- Certification: EMC Approved
- CE Approved: Yes
OceanLED 'Colours' TH Pro Series HD Gen2 LED Underwater Lighting - Color-Change
$2,789.10 $3,099.00
Pro Series 'Colours' TH HD Gen2
Colours by OceanLED are the first high-powered color change underwater
LED lights for boats that allow boat owners to choose the color of their lights from an unlimited color pallet, and now they're even brighter!
Colours utilize the very latest 4-channel RGBW (Red/Green/Blue/White) High
Definition LEDs. Controlled via DMX-512 through the vessels onboard systems,
or wirelessly via third party devices such as an iPad, iPhone or Android,
Colours allows you to preprogram more than 40 static and dynamic color
scenes to set the mood, enhance an onboard event, strobe to attract fish, or
even change color with the time of day.
The Colours Thru-Hull model with the world's smallest hole cut-out for a
thru hull light at only 1" and a 1-inch (25mm) profile head make it the ideal underwater light for transom mount applications.
Suitable for all hull types up to and over 65' (20m) using 2-6 lights with
spacing of 3-5' (1-1.5m) - for metal hulls, add the Delrin Isolation Sleeve
accessory. Deutsch plug-and-play quick connectors make this light a quick fit. Maintenance is easy; just wipe away marine growth from its scratch resistant Tritonium glass lens.
For a color-change light with a lower profile head for hull mount applications, or that can be exchanged without hauling, choose Colours XFM.
- For Boats up to 65' (20M)
- 1" Hole in Hull
- Equals to 150w HID/Metal Halide
- 40,000+ Hour Life
- Tritonium Lens Resists Sea Growth
- Aluminium Bronze AB2
- 110vAC: 1.1A
- 240vAC: 0.5A
Mounting Recommendations:
Boat Size:up to 65' (20M)
Transom Spacing:3-5' (1.0-1.5M)
Transom Quantity: 2-6
Hull Spacing:3-6' (1.0-1.8M)
Installation Depth (to top of fixture): 8-10" (200-250mm)
Technical
Light Output Equivalent To: 250W HID Metal Halides
Fixture Lumens (total light output from a finished fixture): N/A
Current/Amp Draw (DC) (AC Upgrade Available): N/A
Current/Amp Draw (AC): 110VAC 50/60HZ 1.1A / 240VAC 50/60HZ 0.5A
Quick Guide (pdf)
Brochure (pdf)
OceanLED 2010TH Pro Series HD Gen2 LED Underwater Lighting - Ultra White
$1,709.10 $1,899.00
Pro Series TH HD Gen2
The original Thru-Hull with the world's smallest hole cut-out for a thru hull light at only 1" is now brighter again - the 2010TH HD Gen2 model is 67% brighter than its predecessor by exploiting the next generation of High Definition LEDs from Cree.
With 7,000-fixture lumen brightness and a 1-inch (25mm) profile head make the 2010TH the ideal underwater light for transom mount applications.
Suitable for all hull types up to and over 65' (20m) using 2-6 lights with spacing of 3-5' (1-1.5m) - for metal hulls, choose the Delrin Isolation Sleeve accessory. Deutsch plug-and-play quick connectors make this light a quick fit. Maintenance is easy; just wipe away marine growth from its scratch resistant TritoniumT glass lens. Three super bright LED color options.
For an even brighter light choose 3010TH HD Gen2. For a light with a lower profile head for hull mount applications, or that can be exchanged without hauling, choose from our XFM models. For a light with color-change capabilities choose from our Colours models.
- 12/24vDC (AC Upgrade Available)
- 40,000+ Hour Life
- Tritonium Marine Growth Protection
- Plug & Play
- Aluminium Bronze AB2
- Factory Sealed
- Reverse Polarity Protected
Mounting Recommendations:
Boat Size:up to 65' (20M)
Transom Spacing:3-5' (1.0-1.5M)
Transom Quantity: 2-6
Hull Spacing:3-6' (1.0-1.8M)
Installation Depth (to top of fixture): 8-10" (200-250mm)
Technical
Light Output Equivalent To: 250W HID Metal Halides
Fixture Lumens (total light output from a finished fixture): 7,000
Current/Amp Draw (DC) (AC Upgrade Available): 12VDC 5.8A / 24VDC 2.9A
Current/Amp Draw (AC): 110VAC 50/60HZ 0.76 / 240VAC 50/60HZ 0.35A
Quick Guide (pdf)
Brochure (pdf)
OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Ultra White
$2,699.10 $2,999.00
Pro Series XFM HD Gen2
XFM models, or Xchangeable Flush Mounts, are just that - they're
exchangeable without hauling should servicing ever be needed. Their
exceptionally low profile head offers virtually unlimited hull mounting options, including retrofitting into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output.
At 7,000-fixture lumen brightness the 2010XFM HD Gen2 model is 67%
brighter than its predecessor by exploiting the next generation of High
Definition LEDs from Cree.
Suitable for all hull types up to and over 65' (20m) using 2-6 lights with
spacing of 3-5' (1-1.5m) - for metal hulls, add the Delrin Isolation Sleeve
accessory. Deutsch plug-and-play quick connectors make this light a quick fit. Maintenance is easy; just wipe away marine growth from its scratch resistant Tritonium glass lens. Three super bright LED color options.
For an even brighter light choose 3010XFM HD Gen2. For a light with a smaller hole cut-out better suited for transom mount applications choose 2010TH. For a light with color-change capabilities choose from our Colours models.
- 12/24vDC (AC Upgrade Available)
- 40,000+ Hour Life
- Tritonium Marine Growth Protection
- Plug & Play
- Aluminium Bronze AB2
- Factory Sealed
- Reverse Polarity Protected
Mounting Recommendations:
Boat Size:up to 65' (20M)
Transom Spacing:3-5' (1.0-1.5M)
Transom Quantity: 2-6
Hull Spacing:3-6' (1.0-1.8M)
Installation Depth (to top of fixture): 8-10" (200-250mm)
Technical
Light Output Equivalent To: 250W HID Metal Halides
Fixture Lumens (total light output from a finished fixture): 7,000
Current/Amp Draw (DC) (AC Upgrade Available): 12VDC 5.8A / 24VDC 2.9A
Current/Amp Draw (AC): 110VAC 50/60HZ 0.76 / 240VAC 50/60HZ 0.35A
Quick Guide (pdf)
Brochure (pdf)
OceanLED 3010 HD Series Driver
$540.00 $660.00
3010 HD Series Driver - 12/24vDC
Features:
- 12/24v DC Driver for Pro Series HD 3010 models
-
Input Voltage: 12 VDC, 24 VDC
-
Current: 4 Amps
- Recommended Fuse:6.3 Amp
OceanLED 3010XFM Pro Series HD Gen2 LED Underwater Lighting - Ultra White
$3,149.10 $3,499.00
Pro Series XFM HD Gen2
XFM models, or Xchangeable Flush Mounts, are just that - they're exchangeable without hauling should servicing ever be needed. Their exceptionally low profile head offers virtually unlimited hull mounting options, including retrofitting into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output.
At 10,000-fixture lumen brightness the 3010XFM HD Gen2 model is 43% brighter
than its predecessor by exploiting the next generation of High Definition LEDs from Cree.
Suitable for all hull types over 65' (20m) using 4 or more lights with spacing of 3-6' (1-1.8m) - for metal hulls, add the Delrin Isolation Sleeve accessory. Deutsch plugand- play quick connectors make this light a quick fit. Maintenance is easy; just wipe away marine growth from its scratch resistant Tritonium glass lens. Three super bright LED color options.
For a light that's less bright choose 2010XFM HD Gen2. For a light with a smaller hole cut-out better suited for transom mount applications choose 3010TH. For a light with color-change capabilities choose from our Colours models.
- 12/24vDC (AC Upgrade Available)
- 40,000+ Hour Life
- Tritonium Marine Growth Protection
- Plug & Play
- Aluminium Bronze AB2
- Factory Sealed
- Reverse Polarity Protected
Mounting Recommendations:
Boat Size:up to 65' (20M)
Transom Spacing:3-6' (1.0-1.8M)
Transom Quantity: 4+
Hull Spacing:4-8' (1.2-2.4M)
Installation Depth (to top of fixture): 10-12" (250-300mm)
Technical
Light Output Equivalent To: 2x100W HID Metal Halides
Fixture Lumens (total light output from a finished fixture): 10,000
Current/Amp Draw (DC) (AC Upgrade Available): 12VDC 10A / 24VDC 5A
Current/Amp Draw (AC): 110VAC 50/60HZ 1.3A / 240VAC 50/60HZ 0.6A
Quick Guide (pdf)
Brochure (pdf)
OceanLED Allure 150XFM HD Gen2 MK2 Underwater Light - Ultra White
$1,799.10 $1,999.00
Allure 150XFM HD Gen2 MK2 Underwater Light - Ultra White
Xchangeable Flush Mount is the latest body style within the Pro Series HD range, designed to be exchanged without hauling should servicing ever be needed. XFM features an exceptionally low profile giving it virtually unlimited hull mounting options and can be retrofitted into most existing underwater lighting hole cutsouts, offering immediate benefits of no startup power surge, low heat, minimal maintenance and improved light output.
The Allure 150XFM HD with the brightness equivalent to 150w HID/Metal Halide
using the lastest High Definition LEDs.
Suitable for Fiberglass, GRP and wooden hulls over or above 65' (20m) using
4 or more lights with spacing of 3-6' (1-1.8m). Deutsche plug-and-play quick
connectors make this light a quick fit.
Also suitable for aluminum/steel hulls using the Delrin Isolation Sleeve accessory.
Features:
- Xchangeable from Inside the Hull
- Equal to 150W HID/Metal Halide
- 3-1/4" Hole
- 110/240V AC
- 12/24V DC
- 6500 Fixture Lumens
- 36/110° Dual Bean
- 40,000+ Hour Life
- Aluminium Bronze AB2 Bezel/Hard Anodized Aluminium Body
- Plug & Play
- Factory Sealed Unit
Mounting Recommendations:
Boat Size: up to 65' (20m)
Transom/Hull Spacing: 3-5'(1-1.5m)
Maximnum Hull Thickness: 2-3/4"
Technical:
Minimum-Maximum operating voltage DC: 9-32V DC
Minimum-Maximum operating voltage AC: 110-240V AC
Current / Amp draw (DC): 12V DC 5.5 AMP, 24V DC 2.75 AMP
Current / Amp draw (AC): 600mA @ 110V AC
Approx. light penetration (avg. water quality): 36' (11m)
Approx. Light penetration (perfect water quality) up to 85' (26+m)
Driver type: External
Driver size V DC (L x W x H): 6" x 2 1/2" x 1 1/2"
Physcial:
Diameter of fixture: 4-7/50" (105mm)
Length of fixture: 6-9/20" (164mm)
Profile (height) of fixture: 4/26" (4mm)
Total weight including electrical driver: 3.52lbs (1.6kgs)
Extension cable length (standard-hard wired to light) 6-1/2' (2m)
Hole cut-out for cable entry: 3-1/4" (82.6mm)
Material: Aluminium Bronze AB2
Lens: Tritonium Optical Lens
Package Includes:
- 12/24V DC Driver w/Power Cable
- 2m/6' Connection Cable
OceanLED Allure 50XFM HD Gen2 MK2 Underwater Lighting - Midnight Blue
$1,349.10 $1,499.00
Allure 50XFM HD Gen2 MK2 Underwater Lighting - Midnight Blue
Xchangeable Flush Mount is the latest body style within the Pro Series HD range, designed to be exchanged without hauling should servicing ever be needed. XFM features an exceptionally low profile giving it virtually unlimited hull mounting options and can be retrofitted into most existing underwater lighting hole cutsouts,offering immediate benefits of no startup power surge, low heat, minimal maintenance and improved light output.
The Allure 50XFM HD with the brightness equivalent to 50w HID/Metal Halide using the latest High Definition LEDs.
Suitable for Fiberglass, GRP and wooden hulls up to 65' (20m) using 2-6 lights with spacing of 3-5' (1-1.5m). Deutsche plug-and-play quick connectors make this light a quick fit.
Also suitable for aluminum/steel hulls using the Delrin Isolation Sleeve accessory.
Features:
- Xchangeable from Inside the Hull
- Equal to 50W HID/Metal Halide
- 2-3/8" Hole
- 12VDC
- 3000 Fixture Lumens
- 60° Bean
- 40,000+ Hour Life
- Aluminium Bronze AB2 Bezel/Hard Anodized Aluminium Body
- Plug & Play
- Factory Sealed Unit
Mounting Recommendations:
Boat Size: up to 65' (20m)
Transom/Hull Spacing: 3-5'(1-1.5m)
Maximnum Hull Thickness: 2-1/4"
Technical:
Minimum-Maximum operating voltage DC: 9-15V DC
Current / Amp draw (DC): 12V DC 4.1 AMP
Approx. light penetration (avg. water quality): 27' (8.5m)
Approx. Light penetration (perfect water quality) up to 78' (24+m)
Driver type: External
Driver size V DC (L x W x H): 6" x 2 1/2" x 1 1/2"
Physcial:
Diameter of fixture: 3-3/20" (105mm)
Length of fixture: 4-23/25"(164mm)
Profile (height) of fixture: 7/50" (3.5mm)
Total weight including electrical driver: 1.76lbs (800gms)
Extension cable length (standard-hard wired to light) 6-1/2' (2m)
Hole cut-out for cable entry: 2-3/8" (60.3mm)
Material: Aluminium Bronze AB2
Lens: Tritonium Optical Lens
Package Includes:
- 12V DC Driver w/Power Cable
- 2m/6' Connection Cable
OceanLED Allure 50XFM HD Gen2 MK2 Underwater Lighting - Ultra White
$1,349.10 $1,499.00
Allure 50XFM HD Gen2 MK2 Underwater Lighting - Ultra White
Xchangeable Flush Mount is the latest body style within the Pro Series HD range, designed to be exchanged without hauling should servicing ever be needed. XFM features an exceptionally low profile giving it virtually unlimited hull mounting options and can be retrofitted into most existing underwater lighting hole cutsouts,offering immediate benefits of no startup power surge, low heat, minimal maintenance and improved light output.
The Allure 50XFM HD with the brightness equivalent to 50w HID/Metal Halide using the latest High Definition LEDs.
Suitable for Fiberglass, GRP and wooden hulls up to 65' (20m) using 2-6 lights with spacing of 3-5' (1-1.5m). Deutsche plug-and-play quick connectors make this light a quick fit.
Also suitable for aluminum/steel hulls using the Delrin Isolation Sleeve accessory.
Features:
- Xchangeable from Inside the Hull
- Equal to 50W HID/Metal Halide
- 2-3/8" Hole
- 12VDC
- 3000 Fixture Lumens
- 60° Bean
- 40,000+ Hour Life
- Aluminium Bronze AB2 Bezel/Hard Anodized Aluminium Body
- Plug & Play
- Factory Sealed Unit
Mounting Recommendations:
Boat Size: up to 65' (20m)
Transom/Hull Spacing: 3-5'(1-1.5m)
Maximnum Hull Thickness: 2-1/4"
Technical:
Minimum-Maximum operating voltage DC: 9-15V DC
Current / Amp draw (DC): 12V DC 4.1 AMP
Approx. light penetration (avg. water quality): 27' (8.5m)
Approx. Light penetration (perfect water quality) up to 78' (24+m)
Driver type: External
Driver size V DC (L x W x H): 6" x 2 1/2" x 1 1/2"
Physcial:
Diameter of fixture: 3-3/20" (105mm)
Length of fixture: 4-23/25"(164mm)
Profile (height) of fixture: 7/50" (3.5mm)
Total weight including electrical driver: 1.76lbs (800gms)
Extension cable length (standard-hard wired to light) 6-1/2' (2m)
Hole cut-out for cable entry: 2-3/8" (60.3mm)
Material: Aluminium Bronze AB2
Lens: Tritonium Optical Lens
Package Includes:
- 12V DC Driver w/Power Cable
- 2m/6' Connection Cable
OceanLED DMX Touch Panel Controller
$1,090.80 $1,212.00
DMX Touch Panel Controller
The DMX touch panel controller allows you to communicate with all the lights in the system as a complete lighting system. At least one DMX control panel is required to control Pro Series Colours model lights, whether you choose this model or the Wi-Fi model.
Brochure (pdf)
OceanLED Ethernet Colours Connection Cable - 3M
$80.10 $89.00
Ethernet Colours Connection Cable - 3M
The 3 meter IP68 Ethernet (or CAT 5) harness is used to connect each additional driver until the last driver in chain is connected. This is a required part for Pro Series Colours model installs. One Ethernet Colours Connection Cable is required for each driver-to-driver connection.
OceanLED Sport S3116s Underwater LED Light - Midnight Blue
$449.10 $499.00
Sport S3116s Underwater LED Light - Midnight Blue
OceanLED Sport S3116s has been designed and built for those who want to stand out. Whether cruising in the Mediterranean or fishing in The Keys, the S3116s gives dazzling performance allowing you to enjoy more time on the water.
The S3116s has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam angle providing greater water penetration, illuminating a larger area without any loss. There are other lights in the market that claim to be bright, but if you dont focus that power, you don't achieve great results and thats what sets OceanLED apart from the rest.
The S3116s packs a powerful 9,840 Lumens into a small body, and when you combine that with the advanced optics, the results are truly remarkable. At least 20% brighter than our competitors and with a true 90° beam angle with no fade at the edges, the S3116s is clearly best-in-class.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The compact, simple design is easy to install even for the weekend DIYer. A small 12mm hole is all that's needed to run the cable through the hull. Fix 3 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
- 9,840 Lumens / 5,000 Fixture Lumens: Best-in-class performance from this ultra-bright light makes it the obvious choice for those who want to stand out from the crowd
- 90° / 20° Beam Angle: A true wide-angled, focused beam lights up a large area of the water
- Compact and simple design: Made from corrosion free Alu Bronze, there is a lot packed into this 10cm light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required
- Easy to clean: Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it
- Fish-Strobe Mode: Exceptionally bright, randomised strobing of the light is proven to attract more fish and catch more bait
Specifications:
- Boat size: Up to 65' (20M)
- Transom / Hull spacing: 2-4' (0.5-1.2M)
- Transom quantity: 2-6
- Installation depth (to top of fixture): 8-10" (20-25cm)
- Light output equivalent to: 150W Metal Halide
- Lumens: 9840
- Fixture Lumens: 5000
= - Typical LED life expectancy: 40,000+ Hours
- Minimum-Maximum operating voltage DC: 9-32V DC
- Current / Amp draw (DC): 12V DC 5A / 24V DC 2.4A
- Approx. light penetration (avg. water quality): TBC
- Approx. Light penetration (perfect water quality): TBC
- Driver type: Internal
- Total weight: 0.70kg
- Extension cable length (standard): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: AB2 Aluminium Bronze
OceanLED Sport S3124s Underwater LED Light - Ultra White/Midnight Blue
$476.10 $529.00
Sport S3124s Underwater LED Light - Ultra White/Midnight Blue
The OceanLED Sport series is the perfect choice for fishing and cruising in small to medium sized boats.
Advanced optics, designed exclusively by OceanLED create an optically efficient 90°surface beam angle with a focused 20° side beam displaying a striking amount of water penetration and a significantly larger illuminated area. With twice the amount of LEDs as its competitors, the dual color S3124s is the leader in its class. Simply toggle the power between white, blue, strobe and fade modes.
Features:
- 3000 Fixture Lumens
- 90°/20° Beam Angle
- Compact and simple design
- Simple to install
- Easy to clean
- Fish-Strobe Mode
- Fade Mode
OceanLED X-Series X16 - White LEDs
$719.10 $799.00
X-Series X16 - White LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
- Boat size: up to 65' (20M)
- Transom / Hull spacing: 2-4' (0.5-1.2M)
- Transom quantity: 2-6
- Hull quantity: 4-8" (10-20cm)
- Maximum hull thickness: N/A
- Installation depth (to top of fixture): 300mm below water line
- In water fitting: No
Technical
- Light output equivalent to: 150 Metal Halide
- Fixture Lumens* (total light output from a finished fixture): 4,500
- Lumens: 5,800
- Beam angle: 60° circular
- Typical LED life expectancy: 40,000 hours
- Minimum-Maximum operating voltage DC: 9 - 32 V DC
- Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
- Approx. light penetration (avg. water quality): 40' (12M)
- Approx. Light penetration (perfect water quality): 100' (30M)
- Driver type: Internal
- Driver size (L x W x H): N/A
- Colour options: Ultra White - Midnight Blue or Colours
- Correlated Color Temp: 6500 K - 450 nm
- IP Rating: IP68
- Fish strobe: YES
- Anti fouling properties: Tritonium coated lens
- LED Manufacturer: CREE
Physical
- Size: 9.84" (250mm) x 4.29" (109mm)
- Depth: 0.86" (22mm)
- Total weight including electrical driver: 0.50kg
- Extension cable length (standard-hard wired to light): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: Chemically Resistant Optical Polymer
- Lens material: Pilkington Optiwhite
- Body construction: Machined (First Release)
- Bezel material: Plastic
- Bezel thickness: N/A
- Bezel options: Stainless Steel Bezel Optional
- Bezel colour: White
- Drag factor: N/A
- Optics: Collimator
- No of LEDs: 16
- Certification: EMC Approved
- CE Approved: Yes
OceanLED X-Series X4 - White LEDs
$198.00 $220.00
X-Series X4 - White LEDs
The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
1,450 Lumens / 1,150 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
- Boat size: up to 30' (9M)
- Transom / Hull spacing: 2-3' (0.5-1.0M)
- Transom quantity: 2-4
- Hull quantity: 4-8" (10-20cm)
- Maximum hull thickness: N/A
- Installation depth (to top of fixture): 300mm below water line
- In water fitting: No
Technical
- Light output equivalent to: 150W metal halide
- Fixture Lumens* (total light output from a finished fixture): 1,150
- Lumens: 1,450
- Beam angle: 60° circular
- Typical LED life expectancy: 40,000 hours
- Minimum-Maximum operating voltage DC: 9 - 32 V DC
- Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC
- Approx. light penetration (avg. water quality): 20' (6M)
- Approx. Light penetration (perfect water quality): 45' (13+M)
- Driver type: Internal
- Driver size (L x W x H): N/A
- Colour options: Ultra White - Midnight Blue
- Correlated Color Temp: 6500 K - 450 nm
- IP Rating: IP68
- Fish strobe: YES
- Anti fouling properties: Tritonium coated lens
- LED Manufacturer: CREE
Physical
- Size: 5.4" (137mm) x 2.91" (74mm)
- Depth: 0.86" (22mm)
- Total weight including electrical driver: 0.70kg
- Extension cable length (standard-hard wired to light): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: AB2
- Lens material: Pilkington Optiwhite
- Body construction: Chemically resistant optical polymer
- Bezel material: Plastic
- Bezel thickness: N/A
- Bezel options: Stainless Steel Bezel Optional
- Bezel colour: White
- Drag factor: N/A
- Optics: Collimator
- No of LEDs: 4
- Certification: EMC Approved
- CE Approved: Yes
OceanLED X-Series X8 - Colours LEDs
$594.00 $660.00
X-Series X8 - Colours LEDs
The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
2,900 Lumens / 2,300 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
- Boat size: up to 50' (15M)
- Transom / Hull spacing: 2-4' (0.5-1.2M)
- Transom quantity: 2-6
- Hull quantity: 4-8" (10-20cm)
- Maximum hull thickness: N/A
- Installation depth (to top of fixture): 300mm below water line
- In water fitting: No
Technical
- Light output equivalent to: 50W Xenon
- Fixture Lumens* (total light output from a finished fixture): 2,300
- Lumens: 2,900
- Beam angle: 60° circular
- Typical LED life expectancy: 40,000 hours
- Minimum-Maximum operating voltage DC: 9 - 32 V DC
- Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC
- Approx. light penetration (avg. water quality): 26' (8M)
- Approx. Light penetration (perfect water quality): 72' (21+M)
- Driver type: Internal
- Driver size (L x W x H): N/A
- Colour options: Ultra White - Midnight Blue or Colours
- Correlated Color Temp: 6500 K - 450 nm
- IP Rating: IP68
- Fish strobe: YES
- Anti fouling properties: Tritonium coated lens
- LED Manufacturer: CREE
Physical
- Size: 8.62" (219mm) x 3.07" (78mm)
- Depth: 0.86" (22mm)
- Total weight including electrical driver: 0.34kg
- Extension cable length (standard-hard wired to light): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: Chemically Resistant Optical Polymer
- Lens material: Pilkington Optiwhite
- Body construction: Machined (First Release)
- Bezel material: Plastic
- Bezel thickness: N/A
- Bezel options: Stainless Steel Bezel Optional
- Bezel colour: White
- Drag factor: N/A
- Optics: Collimator
- No of LEDs: 8
- Certification: EMC Approved
- CE Approved: Yes
OceanLED X-Series X8 - White LEDs
$396.00 $440.00
X-Series X8 - White LEDs
The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
2,900 Lumens / 2,300 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
- Boat size: up to 50' (15M)
- Transom / Hull spacing: 2-4' (0.5-1.2M)
- Transom quantity: 2-6
- Hull quantity: 4-8" (10-20cm)
- Maximum hull thickness: N/A
- Installation depth (to top of fixture): 300mm below water line
- In water fitting: No
Technical
- Light output equivalent to: 50W Xenon
- Fixture Lumens* (total light output from a finished fixture): 2,300
- Lumens: 2,900
- Beam angle: 60° circular
- Typical LED life expectancy: 40,000 hours
- Minimum-Maximum operating voltage DC: 9 - 32 V DC
- Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC
- Approx. light penetration (avg. water quality): 26' (8M)
- Approx. Light penetration (perfect water quality): 72' (21+M)
- Driver type: Internal
- Driver size (L x W x H): N/A
- Colour options: Ultra White - Midnight Blue or Colours
- Correlated Color Temp: 6500 K - 450 nm
- IP Rating: IP68
- Fish strobe: YES
- Anti fouling properties: Tritonium coated lens
- LED Manufacturer: CREE
Physical
- Size: 8.62" (219mm) x 3.07" (78mm)
- Depth: 0.86" (22mm)
- Total weight including electrical driver: 0.34kg
- Extension cable length (standard-hard wired to light): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: Chemically Resistant Optical Polymer
- Lens material: Pilkington Optiwhite
- Body construction: Machined (First Release)
- Bezel material: Plastic
- Bezel thickness: N/A
- Bezel options: Stainless Steel Bezel Optional
- Bezel colour: White
- Drag factor: N/A
- Optics: Collimator
- No of LEDs: 8
- Certification: EMC Approved
- CE Approved: Yes
OceanLED X16 Stainless Steel Bezel
$98.99 $107.88
X16 Stainless Steel Bezel
Optional Stainless Steel Bezel for X-Series X16 Underwater LED Light.
OceanLED X4 Stainless Steel Bezel
$53.99 $58.34
X4 Stainless Steel Bezel
Optional Stainless Steel Bezel for X-Series X4 Underwater LED Light.
OceanLED X8 Stainless Steel Bezel
$83.99 $91.08
X8 Stainless Steel Bezel
Optional Stainless Steel Bezel for X-Series X8 Underwater LED Light.
OceanLED XT8 Xtreme Series Underwater Light - Sea Green
$337.99 $440.00
XT8 Xtreme Series Underwater Light - Sea Green
Economically create an impressive underwater lighting ambiance with
OceanLED's XT Series underwater LED lights for boats up to 33'. Excellent
solution for new installations as well as retrofit with its industry leading
built-in driver, ultra-low power consumption and exceptionally
easy-to-install mounting options. Effortless maintenance due to our
propietary Tritonium coating; just wipe away marine growth. High-intensity
LEDs produce superior light output of up to 3000 lumens. The smart and
fault-sensing thermal fold-back protection and voltage drop shutdown
protection ensure safety and product longevity. Backed by OceanLED's 2-Year
Manufacturers Warranty.
Features:
- Improved Rugged Plastic Bezel Design
- 1/2" Hole in Hull
- Easy On/Off Control Feature
- 9' Tinned Copper Cable Included for Easy Install
- 12/24V DC
- Tritonium Marine Growth Protection
Specifications:
- Boat Size: up to 33'
- Transom/Hull Spacing: 2-3'
- Transom Quantity: 2 to 3
- Voltage Range: 9-32V DC
- AMPS @12V: 1A
- Equivalent: 35W Xenon
- LEDS (quantity, #): 8
- LED Color: Sea Green
- Fixture Lumens: 1500
- Volts: 12/24V DC
- Size: 219mm x 74mm x 20mm
- Boat Size: up to 33' (10m)
- Angle: 60 Degrees
- Hole Size: 12mm
OceanLED Xtreme Series OceanDMX Kit
$863.10 $959.00
Xtreme Series OceanDMX Kit
Take control of your OceanLED Xtreme DMX Series Colours lights viayour iOS or Android device.With the OceanDMX App for Android and iOS, you have all thecontrol and customisation you need to create any scene or light displayyou wish, with full control over sensitivity, speed and brightness.Choose between standard static, cycle or strobe modes. Alternatively,use audio or wave motion modes to control the colour scheme of yourchoice.The OceanDMX App has been custom designed with an easy to usemenu structure for use solely with the new OceanDMX Controller,which transmits its own unique WiFi network for your mobile device toconnect with.To use audio control, simply attach your vessels sound system to theDMX controller via a standard audio jack. In wave motion mode, youcan create a dramatic display whilst on the move upon wave impact.
OceanLED Colours App
- Free download for iOS / Android
- Compatible with OceanLED Xtreme DMX Series XP8 / XP16
- Unlimited Color Control
- 6 storeable presets
- Strobe / dimming / cycle modes
- Dynamic Audio control mode
- Dynamic Motion control mode
- Easy to use menu system
DMX WiFi Controller
- Dedicated WiFi access point
- IP66 Control Box
- Compatible with OceanLED Pro Series Colours HD
- Semi transparent LID
- LED indicators
- 12/24v DC
- Robust polycarbonate design
Brochure (pdf)
OceanLED X-Series X4 - Midnight Blue LEDs
$198.00 $220.00
X-Series X4 - Midnight Blue LEDs
The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
1,450 Lumens / 1,150 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
- Boat size: up to 30' (9M)
- Transom / Hull spacing: 2-3' (0.5-1.0M)
- Transom quantity: 2-4
- Hull quantity: 4-8" (10-20cm)
- Maximum hull thickness: N/A
- Installation depth (to top of fixture): 300mm below water line
- In water fitting: No
Technical
- Light output equivalent to: 150W metal halide
- Fixture Lumens* (total light output from a finished fixture): 1,150
- Lumens: 1,450
- Beam angle: 60° circular
- Typical LED life expectancy: 40,000 hours
- Minimum-Maximum operating voltage DC: 9 - 32 V DC
- Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC
- Approx. light penetration (avg. water quality): 20' (6M)
- Approx. Light penetration (perfect water quality): 45' (13+M)
- Driver type: Internal
- Driver size (L x W x H): N/A
- Colour options: Ultra White - Midnight Blue
- Correlated Color Temp: 6500 K - 450 nm
- IP Rating: IP68
- Fish strobe: YES
- Anti fouling properties: Tritonium coated lens
- LED Manufacturer: CREE
Physical
- Size: 5.4" (137mm) x 2.91" (74mm)
- Depth: 0.86" (22mm)
- Total weight including electrical driver: 0.70kg
- Extension cable length (standard-hard wired to light): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: AB2
- Lens material: Pilkington Optiwhite
- Body construction: Chemically resistant optical polymer
- Bezel material: Plastic
- Bezel thickness: N/A
- Bezel options: Stainless Steel Bezel Optional
- Bezel colour: White
- Drag factor: N/A
- Optics: Collimator
- No of LEDs: 4
- Certification: EMC Approved
- CE Approved: Yes
OceanLED XP Series DMX Junction Box
$291.99 $329.00
XP Series DMX Junction Box
For use in-conjunction with OceanLED Colours APP and DMX controller. Allows for up to 4 DMX connections to OceanLED Xtreme Series DMX Colours Lights per Junction Box. Can be linked to further DMX junction boxes to connect a series of LED Lights.
Features:
- 12/24v DC
- IP66
- 4x Fused Power/DMX outputs (4A max power output)
- Built-in DMX terminator
- DMX input/output to allow multiple expansion
- To be used in conjunction with OceanLED Xtreme Series DMX Colours
- Robust Polycarbonate Design
- See-through lid to view connections
- Semi-transparent LID
OceanLED Sport S3116s Underwater LED Light - Ultra White
$449.10 $499.00
Sport S3116s Underwater LED Light - Ultra White
OceanLED Sport S3116s has been designed and built for those who want to stand out. Whether cruising in the Mediterranean or fishing in The Keys, the S3116s gives dazzling performance allowing you to enjoy more time on the water.
The S3116s has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam angle providing greater water penetration, illuminating a larger area without any loss. There are other lights in the market that claim to be bright, but if you dont focus that power, you don't achieve great results and thats what sets OceanLED apart from the rest.
The S3116s packs a powerful 9,840 Lumens into a small body, and when you combine that with the advanced optics, the results are truly remarkable. At least 20% brighter than our competitors and with a true 90° beam angle with no fade at the edges, the S3116s is clearly best-in-class.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The compact, simple design is easy to install even for the weekend DIYer. A small 12mm hole is all that's needed to run the cable through the hull. Fix 3 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
- 9,840 Lumens / 5,000 Fixture Lumens: Best-in-class performance from this ultra-bright light makes it the obvious choice for those who want to stand out from the crowd
- 90° / 20° Beam Angle: A true wide-angled, focused beam lights up a large area of the water
- Compact and simple design: Made from corrosion free Alu Bronze, there is a lot packed into this 10cm light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required
- Easy to clean: Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it
- Fish-Strobe Mode: Exceptionally bright, randomised strobing of the light is proven to attract more fish and catch more bait
Specifications:
- Boat size: Up to 65' (20M)
- Transom / Hull spacing: 2-4' (0.5-1.2M)
- Transom quantity: 2-6
= - Installation depth (to top of fixture): 8-10" (20-25cm)
- Light output equivalent to: 150W Metal Halide
- Lumens: 9840
- Fixture Lumens: 5000
- Typical LED life expectancy: 40,000+ Hours
- Minimum-Maximum operating voltage DC: 9-32V DC
- Current / Amp draw (DC): 12V DC 5A / 24V DC 2.4A
- Approx. light penetration (avg. water quality): TBC
- Approx. Light penetration (perfect water quality): TBC
- Driver type: Internal
- Total weight: 0.70kg
- Extension cable length (standard): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: AB2 Aluminium Bronze
Ocean LED X-Series X16 - Colours LEDs
$1,079.10 $1,199.00
X-Series X16 - Colours LEDs
The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.
The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.
Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.
The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.
Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.
Features:
5,800 Lumens / 4,500 Fixture Lumens:
Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.
60° Beam Angle
A wide-angled, focused beam lights up a large area of the water.
Compact and simple design
Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.
Easy to Clean
Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.
Fish-Strobe Mode
Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.
Mounting Recommendations
- Boat size: up to 65' (20M)
- Transom / Hull spacing: 2-4' (0.5-1.2M)
- Transom quantity: 2-6
- Hull quantity: 4-8" (10-20cm)
- Maximum hull thickness: N/A
- Installation depth (to top of fixture): 300mm below water line
- In water fitting: No
Technical
- Light output equivalent to: 150 Metal Halide
- Fixture Lumens* (total light output from a finished fixture): 4,500
- Lumens: 5,800
- Beam angle: 60° circular
- Typical LED life expectancy: 40,000 hours
- Minimum-Maximum operating voltage DC: 9 - 32 V DC
- Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC
- Approx. light penetration (avg. water quality): 40' (12M)
- Approx. Light penetration (perfect water quality): 100' (30M)
- Driver type: Internal
- Driver size (L x W x H): N/A
- Colour options: Ultra White - Midnight Blue or Colours
- Correlated Color Temp: 6500 K - 450 nm
- IP Rating: IP68
- Fish strobe: YES
- Anti fouling properties: Tritonium coated lens
- LED Manufacturer: CREE
Physical
- Size: 9.84" (250mm) x 4.29" (109mm)
- Depth: 0.86" (22mm)
- Total weight including electrical driver: 0.50kg
- Extension cable length (standard-hard wired to light): 9-7/64' (3M)
- Hole cut-out for cable entry: 1/2" (12.5mm)
- Material: Chemically Resistant Optical Polymer
- Lens material: Pilkington Optiwhite
- Body construction: Machined (First Release)
- Bezel material: Plastic
- Bezel thickness: N/A
- Bezel options: Stainless Steel Bezel Optional
- Bezel colour: White
- Drag factor: N/A
- Optics: Collimator
- No of LEDs: 16
- Certification: EMC Approved
- CE Approved: Yes
OceanLED EYES Ocean Camera Gen2 HD
$1,030.50 $1,145.00
EYES Ocean Camera Gen2 HD
The OceanLED EYES (HD Model) Camera is the next generation in underwater cameras with an even sleeker design and many enhanced capabilities. Capture a first-person underwater view of the breathtaking collage of sea life. The plug-n-play device requires a 1-3/8" hole in hull and is exceptionally easy-to-install. The 3.6mm lens with wide 2010 x 1108 angle and external zoom with focus adjustment allows for increased security. Effortless maintenance due to the TritoniumT coating: just wipe away marine growth.
Features:
- High Res: 1920 x 1080p
- Video Output: 1/0Vp-p Composite 75
- 1/2.7" High Sensitivity Progressive CMOS Sensor
- 12 Volt DC
- 4.06mm Fixed Lens
