Maretron SMS100 Short Message Service (SMS) Text Module
$671.99 $695.00
SMS100 Short Message Service (Text) Module
Must be used with a GSM band cell provider, not compatible with Verizon Wireless
Maretron's SMS100 is a mobile or cellular modem that automatically sends text message alerts from your vessel to your phone. The SMS100 works together with Maretron's dedicated displays (DSM150/DSM250) or N2KView software (with the optional N2KView-Alerts module) to detect programmable alert conditions from sensors interconnected on an NMEA 2000 network. The displays or N2KView software instruct the SMS100 to connect to the cellular network and transmit an alert message to selected telephone numbers. Whether it is high bilge water, low battery voltage, unplugged shore power, or an opened hatch or door, the SMS100 quickly alerts you to conditions onboard your vessel that require attention anywhere you have cellular network coverage.
You can also send a text message to your vessel and with the proper sensors installed, the SMS100 will respond with status information including the vessels position, bilge status, battery and shore power voltage, wind speed, inside and outside temperature.
Applications:
- Programmable alerts (Alarms or Warnings) from Maretron installed displays and sensors on the vessel automatically triggers text message(s) sent to your phone
- User can text vessel for status (Position, Bilge Status, Battery and Shore Power Voltage, Wind Speed, Inside and Outside Temp) which also double checks communication path to ensure alerts get through
- Six band GSM modem with easily interchangeable mini-SIM Card (SIM Card is user supplied)
- Dipole terminal antenna with hinged SMA Connector with versatile mounting options
- Weatherproof (IP65) enclosure
Specifications:
- Box Dimensions: 5"H x 7"W x 10"L WT: 1.1 lbs
- UPC: 873804003382
Owner's Manual (pdf)
Brochure (pdf)
Related Items
Actisense Engine Management Unit Analog - NMEA2000
$480.99 $491.65
Engine Management Unit Analog - NMEA2000
Share engine information on the NMEA 2000® bus...
The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor the engine on a vessel.
The EMU-1 has a PC based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models. Capable of measuring a wide range of engine parameters, the EMU-1 reports how the engine is operating and shares the information across the network.
Designed to simplify the conversion of analogue engine parameters (e.g. Temperature, pressure and RPM) into NMEA 2000 engine PGNs, the EMU-1 simplifies processes and reduces the number of input/output wires required at each engine. Additionally, the EMU-1 also supports the conversion of analogue transmission parameters and battery status to the associated NMEA 2000 PGN's.
The two-part screw terminal connection system allows for an easy pluggable connection to an engine wiring harness.
Multiple engines are supported by the setting of the engine instance using the EMU-1 configuration tool. Currently one EMU-1 per engine is supported. Support for multiple engines on a single EMU-1 is currently planned as a future firmware update.
The customised case ensures that the electronics are sealed while allowing quick access to the electrical connections.
It is recommended that an Actisense NGT-1 NMEA 2000 PC Interface is available for every EMU-1 installation. The NGT-1 can be used to update the Firmware, connect the Configuration Tool and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGT-1 page for product details.
Features:
- 6 gauge inputs
- 4 alarm inputs
- 2 tacho inputs
- Logs total engine time using the tacho inputs
- 2 auxiliary inputs for additional flexibility
- Simple single wire gauge connections; common ground referenced
- Manual measurements not required when configuring
- Firmware can be updated over NMEA 2000 network
- Easy customisation for different installations (requires an NGT-1 and PC software)
- Waterproof electronics and splash-proof connections
- Pluggable connectors for quick and easy installation
- Optional DIN rail mounting kit available
Specifications:
- Box Dimensions: 3"H x 6"W x 9"L WT: 1 lbs
- UPC: 175574
Owner's Manual (pdf)
Brochure (pdf)
Actisense NMEA0183 Buffer w/6 ISO-Drive Outputs
$335.99 $343.98
NMEA0183 Buffer w/6 ISO-Drive Outputs
Safely drive up to six NMEA Listeners, with power distribution for the connected Talker...
The Actisense NBF-3 NMEA Buffer isolates and buffers NMEA 0183 data, with the power to drive multiple devices.
The NBF-3 can distribute up to six identical, amplified streams of data from one source. The NMEA signals are buffered to ensure that each Listener receives the data at the required voltage levels, providing consistent data quality.
The isolation on the input and each of the outputs ensures the protection of the source Talker device and all the Listening devices. The safe connections mean that a non-isolated device could be connected and the NBF-3 would prevent it from causing any damage to the other equipment in the system. Ground loops often occur when devices are not isolated and can cause irreparable damage. Actisense ISO-Drive technology on the outputs along with the galvanic opto-isolation on the input means you can connect the NBF-3 with complete peace of mind.
The NBF-3 has the addition of power distribution for the NMEA Talker. By having power and data from the same source, cabling requirements are reduced and installation is simple.
Features:
- Galvanic opto-isolation on the NMEA 0183 input
- ISO-Drive NMEA 0183 outputs provide galvanic isolation to prevent ground loops
- Compatible with all NMEA 0183 versions without requiring configuration
- NMEA 0183 outputs compatible with RS422, RS232 and RS485 type Listeners
- NMEA 0183 input compatible with RS422 and RS232 type Talkers
- DIN Rail mountable
- Pluggable screw terminals for quick and easy installation and diagnostics
- Power and input indicator LEDs
- Works automatically up to 115200 Baud
- Amplification of weak input signals
- Power feed for single cable installation to the NMEA Talker
Specifications:
- Box Dimensions: 3"H x 6"W x 10"L WT: 0.8 lbs
- UPC: 181877
Owner's Manual (pdf)
Brochure (pdf)
Actisense NMEA0183 Data Combiner w/RS232
$343.99 $351.80
NMEA0183 Data Combiner w/RS232
Flexible multiplexing w/preconfigured version for Autoswitching or AIS operation...
The Actisense NDC-4 and NDC-4-USB allow up to five OPTO isolated NMEA 0183 sources to be multiplexed into a single stream*.
Two flexible ISO-Drive outputs allow two different downstream talker baud rates to be created, ensuring maximum system flexibility.
The NDC-4 is flexible and powerful enough to be the heart of a simple system, or one of many Actisense products in a more complex system. It provides complete access to all NMEA 0183 data sources, configurable filters to remove unwanted data, as well as enabling an on-board PC to read and add the combined data stream.
Factory preconfigured versions enable the NDC-4 to be used out of the box for AIS operation (NDC-4-AIS) or as an Autoswitch (NDC-4-ASW).
*Four inputs on the USB version, as the USB interface acts as the fifth channel, overriding the fifth OPTO input.
Specifications:
- Box Dimensions: 3"H x 6"W x 10"L WT: 0.8 lbs
Owner's Manual (pdf)
Brochure (pdf)
Actisense NMEA0183 to NMEA2000 AIS Configured
$200.50
NMEA0183 to NMEA2000 AIS Configured
Hook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices...
NGW-1-ISO-AIS is the NMEA 0183 AIS option. This is a pre-configured version of the standard NGW-1-ISO that enables the conversion of NMEA 0183 AIS data to its equivalent in NMEA 2000. This provides an 'out of the box' solution for quick installation with no configuration required. Please see the conversion list in the downloads section to see which AIS conversions the unit can perform.
The Actisense NGW-1 NMEA 2000 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software provided, it is straightforward to set up which data conversions are required for both directions.
Please go to the Downloads tab to see the up to date list of conversions the various configurations can handle.
Multiple NGW-1 units can be used to multiplex numerous NMEA 0183 devices onto the NMEA 2000 network, using the network as a means of combining and transferring all data items from one place to another.
The Actisense NMEA Reader software utility allows the NGW-1 user to view and understand (in detail) the translated NMEA 0183 sentences output by an NGW-1 directly.
Benefits of the NGW-1:
- Upgrade NMEA 0183 equipment to NMEA 2000
- Allow NMEA 0183 devices to receive vital NMEA 2000 data
- Use the NMEA 2000 bus to multiplex several NMEA 0183 signals together
- Configure using NMEA Reader
Specifications:
- Box Dimensions: 3"H x 6"W x 9"L WT: 0.9 lbs
- UPC: 178538
Owner's Manual (pdf)
Brochure (pdf)
